We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square case fan with hydraulic bearing and 4-wire PWM lead

SXDOOL

SXDOOL PVA080G12H-P00-AE 80mm 4-pin case fan

SKU CH-NNAY-9NM32 MPN PVA080G12H-P00-AE

An 80 mm hydraulic-bearing fan delivering 65 CFM at 750-3900 rpm with 4-wire PWM control for Dell OptiPlex systems

  • Fan Size80mm
  • ColorBlack
  • Hydraulic bearing reduces friction for quiet operation
  • 4-wire PWM control adjusts speed from 750 to 3900 rpm
  • 65 CFM airflow cools compact Dell OptiPlex chassis
  • 80 mm square frame fits standard 80×80×25 mm mounting holes

80 mm 4-pin PWM case fan

The SXDOOL PVA080G12H-P00-AE is an 80 mm square frame fan with a 25 mm thickness. It runs on 12 V DC and draws 0.60 A while a hydraulic bearing supports speeds between 750 and 3900 rpm. The four-wire lead provides PWM speed regulation for motherboard control.

Compatibility and limits

This unit suits owners of Dell OptiPlex 9020, 3020, 7010, 9010, XE2 or T1700 systems that use the 89R8J-A00 part. Builders needing a different mounting pattern, a larger frame size or a three-pin voltage control header should look at other models.

Highlights

  • Hydraulic bearing reduces friction for quiet operation
  • 4-wire PWM control adjusts speed from 750 to 3900 rpm
  • 65 CFM airflow cools compact Dell OptiPlex chassis
  • 80 mm square frame fits standard 80×80×25 mm mounting holes

Specifications

Fan Size80mm
ColorBlack

Questions about this item

How much noise and heat does the 80mm hydraulic-bearing fan produce when running continuously at 3900 rpm?

At full speed the fan moves 65 CFM at 3900 rpm while drawing 0.60 A from a 12 V rail; the hydraulic bearing keeps acoustic output low during sustained operation.

What motherboard header or adapter is required to use the 4-wire 5-pin PWM connector on this fan?

The lead uses a 4-wire 5-pin PWM layout as shown in the figure, so a matching 5-pin PWM header or a suitable 5-pin-to-4-pin adapter is needed for speed control.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.