We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 60mm square case fan with hydraulic bearing and 4-wire 5-hole connector

SXDOOL

SXDOOL PVA060G12M 60mm case fan 12V 0.22A 6025 hydraulic

SKU CH-S01D-9S214 MPN PVA060G12M

60mm hydraulic case fan with 12V 0.22A PWM speed control and Dell 4-pin connector

  • TypeCase Fan
  • Fan Size60mm
  • Bearing TypeHydraulic
  • ColorBlack
  • LEDNon-LED
  • 60 mm frame fits tight server and workstation chassis
  • Hydraulic bearing runs quietly with minimal maintenance
  • 12 V 0.22 A draws little power while cooling
  • 4-wire 5-hole plug enables PWM control and speed monitoring
  • 25 mm depth matches standard 6025 mounting holes

60mm Hydraulic Server Fan

The SXDOOL PVA060G12M is a 60mm case fan built with a hydraulic bearing for continuous operation. It runs on 12V drawing 0.22A and fits the standard 6025 form factor. The black non-LED frame suits rackmount and server chassis where reliability matters more than lighting.

Dell 4-Pin 5-Hole Connector

This unit uses the original Dell 4-pin 5-hole plug that carries both PWM control and speed-report signals. It is aimed at technicians replacing a failed Foxconn cooler in compatible Dell servers or workstations. Builders using standard 3-pin or 4-pin motherboard headers should look elsewhere because the pinout will not match.

12V 0.22A Hydraulic Bearing

The hydraulic bearing is rated for long-life, maintenance-free spinning at the specified voltage and current. That combination of electrical draw and bearing type determines whether the fan can replace the original without changing the power budget or acoustic profile.

Highlights

  • 60 mm frame fits tight server and workstation chassis
  • Hydraulic bearing runs quietly with minimal maintenance
  • 12 V 0.22 A draws little power while cooling
  • 4-wire 5-hole plug enables PWM control and speed monitoring
  • 25 mm depth matches standard 6025 mounting holes

Specifications

TypeCase Fan
Fan Size60mm
Bearing TypeHydraulic
ColorBlack
LEDNon-LED

Questions about this item

Will the 60mm frame with 25mm thickness fit my standard 6025 mounting holes?

Yes, the 60mm square frame and 25mm depth match the 6025 standard so it aligns with typical 60mm case or server fan mounts.

How do I connect the 4-wire 5-hole Dell plug to a standard motherboard header?

Plug the 5-hole connector onto the 4-pin PWM header; the extra hole is a keying slot, so orient the notch toward the clip and press straight down until seated.

Does the hydraulic bearing need oiling or replacement after a period of use?

The maintenance-free hydraulic bearing is sealed for life and does not require lubrication or scheduled replacement under normal operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.