We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 87mm black plastic cooling fan with three-pin power connector

SXDOOL

SXDOOL PLD09210S12HHVoltage 87mm VGA Cooling Fan 12V .40A 3Pin

SKU CH-S173-4TGBS MPN PLD09210S12HHVoltage

87 mm replacement fan delivering over 80 CFM airflow with 12 V 0.40 A 3-pin power

  • Fan Size87mm
  • Air Flow>80 CFM
  • 87 mm frame fits compact graphics cards
  • 12 V 0.40 A 3-pin connector powers directly from the board
  • >80 CFM airflow moves heat away from the GPU
  • 40 mm square mounting-hole pattern matches many reference designs
  • 10 mm slim profile clears low-clearance heatsinks

Replacement fan for specific GPUs

The SXDOOL PLD09210S12HH is an 87mm VGA cooling fan designed to replace the original cooler on compatible graphics cards. It operates at 12V with a 0.40A current draw and connects via a standard 3-pin header. The unit is sold alone without mounting screws or a heatsink.

Who this suits and who it does not

This part suits repairers who have measured their existing fan and confirmed an 87mm frame, 10mm thickness and 40mm centre-to-centre mounting holes. It does not suit buyers who select a fan only by graphics card model number because the same GPU can use different coolers.

Airflow and electrical specification

The fan delivers more than 80 CFM of airflow at the rated 12V and 0.40A. This single figure determines whether the cooler can move enough air for the specific thermal load of the target card.

Highlights

  • 87 mm frame fits compact graphics cards
  • 12 V 0.40 A 3-pin connector powers directly from the board
  • >80 CFM airflow moves heat away from the GPU
  • 40 mm square mounting-hole pattern matches many reference designs
  • 10 mm slim profile clears low-clearance heatsinks

Specifications

BrandRexflo
Fan Size87mm
Air Flow>80 CFM

Questions about this item

Will the 87mm fan with 40mm mounting-hole spacing fit the cooler I already have on my GTX card?

Measure your existing fan: it must be 87mm square, 10mm thick, with holes centred 40mm apart; only then will this replacement align correctly.

How can I confirm the 12V 0.40A 3-pin fan is spinning properly after I install it?

Connect the 3-pin header, power on the PC, and verify the blade rotates smoothly while monitoring RPM in BIOS or fan-control software.

Does the package include mounting screws or a heatsink, or must I source them separately?

The box contains only the 87mm fan; screws, heatsink and any thermal material are not included and must be obtained separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.