We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black square frame fan with four mounting holes and a four-pin connector

SXDOOL

SXDOOL PLD05010S12HH 12V 0.25A 46mm 58mm 4-pin case fan

SKU CH-AS0D-DXVAZ

Cools graphics cards with a 46 mm blade, 58 mm mounting pitch and 4-pin PWM control

  • 12 V 0.25 A draw keeps power use low
  • 46 mm blade fits tight graphics-card spaces
  • 58 mm hole pitch matches common GPU mounts
  • 4-pin PWM header allows precise speed control
  • New condition ensures full rated lifespan

Compact 46 mm fan for tight builds

The SXDOOL PLD05010S12HH is a 12 V DC case fan with a 46 mm blade diameter and a 58 mm mounting pitch. It draws 0.25 A through a standard 4-pin PWM connector for automatic speed control. This form factor suits graphics-card coolers or small-form-factor chassis where full-size fans cannot fit.

Drops into 58 mm hole patterns with PWM control

The 58 mm screw spacing matches many reference GPU shrouds and compact cases, so no adapter brackets are required. Four-wire PWM lets the motherboard or GPU controller vary RPM based on temperature, reducing noise at idle. Only a 12 V fan header is needed; no extra power cables or controllers are involved.

Replaces worn 46 mm 12 V fans on GPU coolers

When the original blower or axial fan fails or becomes noisy, this unit restores targeted airflow over the heatsink. The jump is worth it if the existing fan uses the same 58 mm pitch and 4-pin interface. Builders needing higher static pressure for radiators or larger airflow for case ventilation should look elsewhere.

Highlights

  • 12 V 0.25 A draw keeps power use low
  • 46 mm blade fits tight graphics-card spaces
  • 58 mm hole pitch matches common GPU mounts
  • 4-pin PWM header allows precise speed control
  • New condition ensures full rated lifespan

Specifications

No published specifications for this item yet.

Questions about this item

How long can the PLD05010S12HH run at 12 V and 0.25 A before the motor reaches its thermal limit?

The fan is rated for continuous operation at 12 V and 0.25 A; its thermal limit is reached only if airflow is blocked or ambient temperature exceeds the motor's design range.

What noise level and heat output should I expect from the 46 mm blade running all day at 12 V?

At 12 V the 46 mm blade produces a low hum typical of small DC fans; heat output is minimal because the motor draws only 0.25 A.

Which header must my motherboard or graphics card provide for the 4-wire 4-pin connector?

A standard 4-pin PWM fan header with 58 mm hole spacing is required to power and control the PLD05010S12HH.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.