We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80mm frame fan with three-wire connector

SXDOOL

SXDOOL PLA08010S05L 5V 0.15A 80mm 3-pin case fan

SKU CH-WWJB-CSNCG MPN PLA08010S05L

An 80 mm case fan running at 5 V and 0.15 A with an oil bearing and 3-pin connector

  • Fan Size80mm
  • Power Connector3 Pin
  • 5 V low-voltage operation keeps power draw minimal at 0.15 A
  • 80 mm square frame fits tight chassis slots and standard 8010 mounts
  • 10 mm slim profile clears low-profile coolers and cramped drive cages
  • Oil-bearing motor reduces friction for quieter long-term running
  • Three-wire 3-pin connector enables speed reporting to motherboard headers

Compact 5 V 80 mm case fan

The SXDOOL PLA08010S05L is an 80 mm square frame fan that runs on 5 V and draws 0.15 A through a three-pin connector. Its oil bearing and 10 mm thickness suit tight chassis spaces where a low-voltage header is available.

For builds with 5 V fan headers

This unit fits servers, small-form-factor PCs or embedded boards that provide a 5 V three-pin header and need an 8010-size cooler. Builds whose fan headers supply a different voltage or require PWM control should consider other options.

5 V operating voltage

The fan is rated for 5 V only, so the header on the motherboard or controller must deliver that voltage. If the system supplies a different voltage to its fan headers, the fan will not operate correctly.

Highlights

  • 5 V low-voltage operation keeps power draw minimal at 0.15 A
  • 80 mm square frame fits tight chassis slots and standard 8010 mounts
  • 10 mm slim profile clears low-profile coolers and cramped drive cages
  • Oil-bearing motor reduces friction for quieter long-term running
  • Three-wire 3-pin connector enables speed reporting to motherboard headers

Specifications

Fan Size80mm
Power Connector3 Pin

Questions about this item

Will the 80mm frame and 3-pin connector fit my older chassis that uses 8010 mounting holes?

The fan measures 80 by 80 by 10 mm and uses a standard three-wire 3-pin connector, matching the common 8010 mounting pattern found on many legacy cases.

How can I confirm the 5V 0.15A oil-bearing fan is spinning correctly after I install it?

Connect the 3-pin header to a 5V fan header, power the system, and verify the blades rotate smoothly; the oil bearing should run quietly at the rated current.

Does the package include only the fan or are mounting screws and adapters also supplied?

The supplied unit is the PLA08010S05L fan with its 9 cm three-wire lead; mounting screws and any voltage adapters are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.