We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 92mm square case fan 90 by 90 by 38mm with four pin connector

SXDOOL

SXDOOL PFB0912UHE 92mm 12V 2.35A case fan

SKU CH-DP1K-16JBH MPN PFB0912UHE

A 92mm case fan with dual ball bearings and 4-pin PWM control runs at 12V drawing 2.35A

  • TypeCase Fan
  • Fan Size92mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 92 mm frame fits tight chassis spaces
  • Dual ball bearing extends operational lifespan
  • 12 V PWM control enables precise speed regulation
  • 35 A current delivers strong airflow performance
  • 38 mm thickness suits standard mounting points

92mm 12V High-Current Case Fan

The SXDOOL PFB0912UHE is a 92mm case fan built around a dual ball bearing and a four-pin PWM connector. It runs on 12V DC and draws 2.35A, giving it the torque to move air through restrictive grilles or dense heatsink fins. The 90x90x38mm frame fits standard 92mm mounting points in server chassis, workstations or compact desktop builds. Its non-LED black finish keeps the appearance neutral inside any enclosure.

Suited for High Static Pressure Needs

This fan targets builders who need strong airflow at high static pressure, such as rackmount servers, GPU coolers or radiator stacks where a 38mm thick frame is accepted. The 2.35A current draw means the motherboard header or fan controller must supply enough amperage; systems limited to 1A headers should look elsewhere. Buyers wanting silent low-RPM operation or addressable lighting will not find those features here.

2.35A Current Draw Decides Compatibility

The single specification that decides fitment is the 2.35A current rating at 12V. Verify that your fan header, splitter or controller is rated for at least this amperage before purchase. If the power source cannot deliver 2.35A continuously, the fan may not spin up or could trip protection circuits. No other dimension or feature overrides this electrical requirement.

Highlights

  • 92 mm frame fits tight chassis spaces
  • Dual ball bearing extends operational lifespan
  • 12 V PWM control enables precise speed regulation
  • 35 A current delivers strong airflow performance
  • 38 mm thickness suits standard mounting points

Specifications

TypeCase Fan
Fan Size92mm
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED

Questions about this item

How is the 4-pin PWM connector oriented when mounting the 92 mm fan in a standard case?

Align the keyed 4-pin plug with the motherboard header so the PWM wire sits on the correct pin; forcing it backwards bends pins and disables speed control.

What maintenance does the dual ball bearing require over time?

The dual ball bearing is sealed and lubricated for life; no re-oiling is needed, but dust buildup on blades should be cleaned with compressed air every few months.

At what point does the 2.35 A current draw become the limiting factor during sustained operation?

The 2.35 A rating is the maximum continuous draw; if the motherboard header or fan controller cannot supply that current, the fan will throttle or shut down before thermal limits are reached.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.