We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat 20 cm PCIe 1x extender cable with a 90-degree 36-pin connector, soft axial ribbon, gold-finger cover, bolted PCB ends

SXDOOL

SXDOOL PCIe 1x 36-pin extender 90-degree 20cm

SKU CH-QR9F-83ZAM

A 90-degree PCIe 1x extender with a 20 cm flexible cable and 36-pin connector, designed for 1U and 2U chassis installations

  • TypeCase Fan Accessory
  • 90-degree right-angle connector fits tight 1U or 2U chassis
  • 20 cm flexible axial cable routes easily in compact cases
  • PCIe 1x 36-pin interface supports Gen3 8 Gbps speeds
  • Gold-finger cover and bolted PCB protect contacts from damage
  • High-frequency low-attenuation design keeps signal stable over distance

PCIe 1x 36-pin 90-degree extender

This 20 cm flexible riser adds a right-angled PCI Express 1x connection for tight 1U or 2U chassis. The 36-pin gold-finger interface is protected by a cover and bolted PCB strain relief to prevent tearing at the solder joints.

Gen3 8 Gbps practical ceiling

The axial cable is rated for PCIe Gen3 at 8 Gbps or higher, so bandwidth tops out at that generation. Builders needing Gen4 or Gen5 throughput will hit the cable's electrical limit, and the 1x lane width caps total throughput regardless of slot version.

Bolted PCB and 24 cm overall length

The PCB is swaddled and fixed with bolts and nuts, giving a rigid anchor that resists vibration in rackmount cases. Total assembly length reaches 24 cm including connectors, so verify internal routing space before installing in shallow enclosures.

Highlights

  • 90-degree right-angle connector fits tight 1U or 2U chassis
  • 20 cm flexible axial cable routes easily in compact cases
  • PCIe 1x 36-pin interface supports Gen3 8 Gbps speeds
  • Gold-finger cover and bolted PCB protect contacts from damage
  • High-frequency low-attenuation design keeps signal stable over distance

Specifications

TypeCase Fan Accessory

Questions about this item

Is the 20 cm cable length the right choice for a 1U or 2U chassis?

The 20 cm cable and 24 cm total length are designed for 1U and 2U chassis where space is tight and routing must stay inside the case.

What does the 8 Gbps Gen3 rating mean once the extender is installed?

It means the link can run at PCIe Gen3 1× speeds up to 8 Gbps, so a connected device will not be bottlenecked by the cable itself.

How does the 36-pin 1× edge connector affect compatibility?

The 36-pin 1× edge connector fits any standard PCIe 1× slot, letting you plug in a 1× card or a wider card running at 1× without an adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.