SXDOOL
SXDOOL MFL-B2DN-183PA-R1 case fan 120mm 3-pack ARGB 24 LED 650-1800 RPM
Three 120 mm fans with 24 addressable RGB LEDs each, hybrid static-pressure blades, 650–1800 RPM PWM control, and a wired ARGB controller
- Quiet operation at low speeds with 6 dBA minimum noise
- Bright Duo-Ring lighting from 24 individually controlled ARGB LEDs
- Wide PWM range from 650 to 1800 RPM for flexible cooling
- Hybrid static-pressure blades suit radiators and mesh cases
- Hardware ARGB controller changes colours without software
Three 120 mm ARGB fans with controller
This pack contains three 120 mm case fans that use a hybrid static-pressure blade design and rifle bearings. Each fan spins between 650 and 1800 RPM and delivers 47.2 CFM of airflow at a noise level of 6 to 30 dBA. The 4-pin PWM connector allows the motherboard to adjust speed automatically.
Duo-Ring lighting with 24 addressable LEDs per fan
Every fan carries 24 individually controlled ARGB LEDs arranged in two rings, giving a wide range of colour effects. A wired ARGB controller is included so colours and modes can be changed with a button press without installing extra software. The fans also sync with Aura, Mystic Light and Polychrome Sync motherboard headers.
Simple mounting with vibration-damping pads
Each fan ships with absorbing rubber pads that fit the four corner screw holes, reducing vibration transfer to the case. The 25 mm thickness follows the standard 120 mm form factor, so the fans fit typical case, radiator and heatsink mounts. Builders who need larger diameter fans or higher static pressure for dense radiators should look elsewhere.
Highlights
- Quiet operation at low speeds with 6 dBA minimum noise
- Bright Duo-Ring lighting from 24 individually controlled ARGB LEDs
- Wide PWM range from 650 to 1800 RPM for flexible cooling
- Hybrid static-pressure blades suit radiators and mesh cases
- Hardware ARGB controller changes colours without software
Specifications
No published specifications for this item yet.
Questions about this item
How often should the rifle bearings be serviced or replaced on these 120mm fans?
The rifle-bearing design is sealed and maintenance-free; no lubrication or replacement is required during normal operation.
What limits continuous running at the 1800 RPM ceiling?
PWM control caps speed at 1800 RPM ±10%, and the 30 dBA noise ceiling is reached before thermal or power limits appear.
How loud and how much power do three fans draw at full speed all day?
At 1800 RPM each fan produces up to 30 dBA and 47.2 CFM; the 4-pin PWM connector limits each unit to standard 12 V header current.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



