We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square axial case fan with 4-pin connector

SXDOOL

SXDOOL MF80201VX-Q060-S99 80mm 4-Pin case fan

SKU CH-AN29-K38TP MPN MF80201VX-Q060-S99

An 80 mm axial fan with 4-pin PWM control delivering 40.8 CFM at 12 V and 2.63 W

  • Fan Size80mm
  • Power Connector4 Pin
  • 12 V operation keeps power draw low at 2.63 W
  • 8 CFM airflow moves heat away from tight spaces
  • 4-pin connector enables precise PWM speed control
  • 80 × 80 × 20 mm frame fits standard 80 mm mounts
  • 219 A current draw leaves headroom on the 12 V rail

Purpose-built 80 mm axial fan

The SXDOOL MF80201VX-Q060-S99 is a new Sunon 8020 frame fan designed for chassis airflow where an 80 mm mounting pattern is required. It targets system integrators and DIY builders who need a direct 12 V DC replacement for tight spaces.

4-pin PWM control included

The four-pin connector enables motherboard-controlled speed regulation so the fan runs only as fast as thermal demand dictates. No extra adapters or separate controllers are needed for standard PWM headers.

40.8 CFM at 2.63 W decides fit

This airflow-to-power ratio determines whether the fan can meet a given thermal target within the available 12 V header budget. Builders needing higher static pressure or lower acoustic output must verify those parameters separately.

Highlights

  • 12 V operation keeps power draw low at 2.63 W
  • 8 CFM airflow moves heat away from tight spaces
  • 4-pin connector enables precise PWM speed control
  • 80 × 80 × 20 mm frame fits standard 80 mm mounts
  • 219 A current draw leaves headroom on the 12 V rail

Specifications

Fan Size80mm
Power Connector4 Pin

Questions about this item

How often will the 4-pin connector or the sleeve bearing need replacement?

The 4-pin connector is rated for standard mating cycles; the sleeve bearing typically lasts tens of thousands of hours before noise or wobble appears.

What limit appears first when the fan runs continuously at 12 V and 2.63 W?

Bearing wear and gradual airflow reduction from dust buildup become noticeable before the motor reaches its thermal limit.

How much noise and heat does the 40.8 CFM output produce during all-day operation?

At 2.63 W the motor stays cool; the fan is specified as silent quiet, so audible noise remains low even after hours of continuous running.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.