We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black frame cooling fan with 5557 plug visible

SXDOOL

SXDOOL JING DA JD12038A2B 220V 120x120x38mm 2-wire 5557 plug

SKU CH-THDS-5TMVY

A 220 V servo-motor ball-bearing fan measuring 120 × 120 × 38 mm with a 2-wire 5557 plug

  • Servo motor with ball bearing ensures smooth operation
  • 220V rating suits mains-powered equipment directly
  • 120mm square frame fits standard 120mm mounting points
  • 38mm thickness provides deeper blade profile for airflow
  • 5557 plug compatible with 5559 and 5566 connectors

120mm cross cooling fan

This 120mm by 120mm by 38mm case fan uses a servo motor with ball bearings and runs on 220V mains voltage. The two-wire design connects through a 5557 plug for direct power delivery. It is suited for industrial enclosures or custom server chassis that need high-voltage airflow. Buyers who need a low-voltage PWM fan for a standard motherboard header should choose a different model.

5557 plug compatibility

The supplied 5557 plug matches 5566 and 5559 counterparts, so verify the mating connector before purchase. If the existing harness uses a different pin layout the plug can be removed and the wires terminated directly. This replaces older 220V axial fans of the same frame size when the connector matches. The upgrade is worthwhile only when the mounting holes and voltage rating align exactly.

Two-wire mains installation

Installation requires wiring the two leads to a 220V supply with proper insulation and strain relief. No speed control or tachometer signal is provided, so the fan runs at full speed continuously. Common issues include mismatched connector polarity and insufficient clearance for the 38mm depth in tight chassis. Always confirm the 5557 socket fits before applying power.

Highlights

  • Servo motor with ball bearing ensures smooth operation
  • 220V rating suits mains-powered equipment directly
  • 120mm square frame fits standard 120mm mounting points
  • 38mm thickness provides deeper blade profile for airflow
  • 5557 plug compatible with 5559 and 5566 connectors

Specifications

No published specifications for this item yet.

Questions about this item

Will the 120mm x 120mm x 38mm frame fit my existing 120mm mounting holes?

Yes, the 120mm square frame matches standard 120mm fan mounting patterns, and the 38mm thickness requires that your chassis or panel allows at least 38mm depth.

How do I connect the 2-wire 5557 plug if my equipment uses a 5559 or 5566 socket?

The 5557 plug is not directly compatible with 5559 or 5566 sockets; you must either replace the plug with the correct mating connector or contact the supplier for a custom lead.

When should I expect to replace the ball-bearing motor in this 220V fan?

Ball-bearing motors typically run for tens of thousands of hours; replace the fan when airflow drops noticeably, noise increases, or the motor fails to start.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.