We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black 5 V graphics card fan with three-pin connector and 37 mm blades

SXDOOL

SXDOOL GC054008VH-8 5V 27x35x35mm 37mm vga cooling

SKU CH-VXVX-F29JJ MPN GC054008VH-8

5 V graphics-card fan with a 27 × 35 mm mounting pattern and 37 mm frame

  • 5 V operation keeps power draw low at 0.9 W
  • 37 mm diameter fits tight graphics-card spaces
  • Isosceles 27 mm by 35 mm by 35 mm hole pattern matches many reference boards
  • Three-wire three-pin connector enables speed monitoring
  • SUNON build quality supports continuous cooling duty

Small-form-factor GPU replacement fan

This SUNON GC054008VH-8 cooler is a 5 V three-pin unit built for graphics cards that use a 27 mm by 35 mm isosceles mounting pattern. The 37 mm diameter impeller draws 0.9 W and fits tight shrouds where larger fans cannot.

Suits owners repairing a specific legacy card

Builders needing a drop-in replacement for a cooler with this exact hole spacing and voltage will find it compatible. It is not for buyers who want a larger heatsink assembly, PWM speed control or a different mounting layout.

Drops into the existing shroud and power header

The three-pin connector plugs directly onto the card’s 5 V fan header without adapters. Its compact frame leaves surrounding components untouched and keeps the original thermal solution intact.

Highlights

  • 5 V operation keeps power draw low at 0.9 W
  • 37 mm diameter fits tight graphics-card spaces
  • Isosceles 27 mm by 35 mm by 35 mm hole pattern matches many reference boards
  • Three-wire three-pin connector enables speed monitoring
  • SUNON build quality supports continuous cooling duty

Specifications

No published specifications for this item yet.

Questions about this item

Does my graphics card need a 5 V, three-pin header with a 27 mm by 35 mm isosceles mounting pattern to fit this fan?

Yes, the SUNON GC054008VH-8 requires a 5 V supply and a three-pin connector, and its screw holes are spaced 27 mm by 35 mm in an isosceles layout.

Will the 37 mm diameter of this replacement fan clear the heatsink fins on an older card that used a smaller blower?

The fan measures 37 mm across, so verify that your existing heatsink shroud has at least that much clearance before installing.

How can I confirm the GC054008VH-8 is running correctly once it is fitted?

Check that the fan spins smoothly at 5 V, the three-pin connector reports a tachometer signal to monitoring software, and the GPU temperature drops under load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.