We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black centrifugal blower fan 35x35x10mm with three-pin connector

SXDOOL

SXDOOL GB0535AFV1-8 3.5cm 3510 5V .8W case fan

SKU CH-PKX4-5PBMD

A 3.5 cm centrifugal blower with magnetic levitation bearing runs at 3510 rpm on 5 V DC, drawing 0.8 W and rated for 100000 hours

  • TypeCase Fan
  • Compact 35 mm design fits tight notebook spaces
  • Magnetic levitation bearing extends life to 100,000 hours
  • Low 0.8 W draw keeps power use minimal
  • 3-pin connector enables simple motherboard control

Micro Centrifugal Blower for Tight Spaces

This SXDOOL centrifugal turbo fan measures 35 mm square and 10 mm thick. It runs on 5 V DC and draws 0.8 W through a three-pin connector. Magnetic levitation combined with a vaporising bearing and metal fittings is rated for 100000 hours of continuous operation.

Ideal for Notebook and Small-Form-Factor Cooling

The compact footprint suits notebooks, embedded boards and other micro enclosures where axial fans cannot fit. Builders needing higher airflow, larger frame sizes or PWM speed control should look at alternative solutions.

Highlights

  • Compact 35 mm design fits tight notebook spaces
  • Magnetic levitation bearing extends life to 100,000 hours
  • Low 0.8 W draw keeps power use minimal
  • 3-pin connector enables simple motherboard control

Specifications

TypeCase Fan

Questions about this item

How can I confirm the 3.5cm centrifugal blower is spinning correctly after I connect the 3PIN header to 5V?

The fan should start immediately at its rated 3510 RPM when the 5V supply is live; you can feel focused airflow from the 35x35x10mm outlet and verify the 0.8W draw with a multimeter if needed.

What comes in the box with the GB0535AFV1-8 and do I need any extra cables or mounts?

Only the 35x35x10mm turbo fan with its attached 3PIN lead is supplied; no mounting screws, adapters or PWM cables are included, so source those separately if your chassis requires them.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.