We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 85mm black frame fan with transparent blades and 4-pin connector

SXDOOL

SXDOOL GA91A2HVoltage 85mm 12V .35A 4-pin case fan

SKU CH-ED4E-SBB9M MPN GA91A2HVoltage

85 mm DC 12 V 0.35 A 4-pin replacement fan delivering over 80 CFM for Radeon RX 560 coolers

  • Air Flow>80 CFM
  • Delivers strong airflow with >80 CFM rating
  • Operates on standard 12V DC power supply
  • Low 0.35A current draw reduces power load
  • 4-pin header enables precise PWM speed control
  • Compact 85mm square frame fits tight spaces

Replacement GPU Cooler Fan

The SXDOOL GA91A2HVoltage is a 12 V DC 4-pin fan built to replace a worn cooler on a graphics card. It spins at 0.35 A and delivers over 80 CFM of airflow through a compact 85 mm square frame.

Fit Verification Required

This unit suits repairers who have confirmed the exact mounting hole spacing and physical clearance on their card. It will not suit buyers who rely only on the GPU model name, because the same card revision can use different fan assemblies.

40 mm Mounting Hole Pitch

The critical specification is the 40 mm centre-to-centre distance between the three mounting holes. Measure the original fan before ordering; a mismatch means the fan cannot be secured to the heatsink.

Highlights

  • Delivers strong airflow with >80 CFM rating
  • Operates on standard 12V DC power supply
  • Low 0.35A current draw reduces power load
  • 4-pin header enables precise PWM speed control
  • Compact 85mm square frame fits tight spaces

Specifications

BrandRexflo
Air Flow>80 CFM

Questions about this item

What airflow can the 85mm GA91A2H deliver under sustained load?

The fan is rated for more than 80 CFM of airflow at 12 V and 0.35 A.

How much noise and heat does the 4-pin GA91A2H produce when running all day?

The 10 mm thick frame and 40 mm mounting spacing keep vibration low, and the 0.35 A draw limits heat output during continuous operation.

Which existing connector must my graphics card already have for this replacement fan to work?

Your card needs a 4-pin PWM header that matches the GA91A2H pinout and 40 mm hole pattern.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.