We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 108mm black replacement fans for GTX 1060 graphics cards

SXDOOL

SXDOOL GA82S2H 108mm 30-35 CFM vga cooling

SKU CH-6Z7Y-N42YJ MPN GA82S2H

Two 108 mm replacement fans deliver 30-35 CFM for compatible GTX 1060 cards

  • Fan Size108mm
  • Air Flow30-35 CFM
  • 108 mm fan delivers 30-35 CFM airflow for effective cooling
  • Two fans per pack cover dual-slot graphics cards
  • 12 V DC 0.36 A motor runs from standard 4-pin header
  • 75 x 75 x 15 mm frame matches GALAX and KFA2 GTX 1060 layouts
  • Replacement fan only — no heatsink or screws included

Replacement Fan for Galax and KFA2 GTX 1060

This pair of 108 mm fans is designed as a direct replacement for the GA82S2H cooler used on select Galax GTX 1060 and KFA2 GTX 1060 graphics cards. Each unit operates at 12 V and draws 0.36 A through a standard 4-pin header. The blades deliver 30 to 35 CFM of airflow.

Suitable for owners of matching Galax

Buyers must verify the physical dimensions and mounting-hole spacing against the original fan before ordering. The package contains only the two fans; no heatsink, screws or thermal pads are included. Installers who need a complete cooler assembly or a different connector layout should look elsewhere.

108 mm frame with 30 to 35 CFM airflow

The 108 mm diameter and 30 to 35 CFM rating determine whether this fan can move enough air for the specific heatsink it will sit on. Measure the existing fan's length, width and hole pattern — approximately 75 mm by 75 mm — to confirm compatibility.

Highlights

  • 108 mm fan delivers 30-35 CFM airflow for effective cooling
  • Two fans per pack cover dual-slot graphics cards
  • 12 V DC 0.36 A motor runs from standard 4-pin header
  • 75 x 75 x 15 mm frame matches GALAX and KFA2 GTX 1060 layouts
  • Replacement fan only — no heatsink or screws included

Specifications

BrandRexflo
Fan Size108mm
Air Flow30-35 CFM

Questions about this item

How do I know this 108mm GA82S2H fan fits my GTX 1060?

Measure your card's fan mounting holes and compare them to the 75mm x 75mm frame; the listing covers GALAX and KFA2 GTX 1060 models but hole spacing varies even within the same GPU.

What does the 30-35 CFM airflow figure deliver inside a case?

That range is typical for a 108mm replacement fan spinning at 12V 0.36A, moving enough air to cool a mid-range GTX 1060 heatsink under load.

Will the 4-pin header work with my motherboard or GPU fan controller?

Yes, the 4-pin PWM connector plugs into standard GPU or motherboard headers and lets the controller adjust speed automatically.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.