We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 170mm AC case fan with two wires

SXDOOL

SXDOOL FP-108 170mm AC case fan 110-120V 38W ball bearing

SKU CH-DQHK-84S4G MPN FP-108

A 170 mm AC case fan running on 110-120 V with ball bearings, 38 W power draw and 2700-3100 rpm airflow

  • Fan Size170mm
  • 170 mm frame moves 5.37-6.88 m³/min airflow
  • Ball bearings rated 30,000 hours at 40 °C
  • 110-120 V AC input with 1500 V withstand rating
  • Die-cast aluminium frame resists corrosion and moisture
  • 25 cm lead wires simplify cabinet or server installation

170 mm AC axial fan for mains-powered enclosures

The SXDOOL FP-108 is a 170 mm AC axial fan designed for 110-120 V mains supply. It targets builders who need direct line-voltage cooling in server cabinets, UPS units or industrial chassis without a separate DC power supply. The ball-bearing motor and aluminium frame suit continuous-duty environments where long service intervals are expected.

Sustained airflow at fixed speed

The fan runs at a constant 2700-3100 RPM, delivering 5.37 to 6.88 cubic metres of air per minute while drawing 38 W at 0.50 A. Because it connects directly to AC mains, output does not vary with a motherboard header or PWM curve, so airflow remains steady under prolonged thermal load. The motor is rated for 30000 hours at 40 °C ambient, and the construction is tested to withstand 1500 V for one minute.

Two-wire lead install with clearance check

Connection is a 25 cm two-wire lead that must be wired into an AC circuit; no standard PC fan header is compatible. The frame measures 172 x 150 x 51 mm, so installers must verify mounting-hole spacing and depth before fitting. The aluminium die-cast housing resists corrosion, but the 950 g weight means vibration damping is advisable in thin panels. Buyers who need variable speed control or a standard 4-pin PWM connector cannot use this model.

Highlights

  • 170 mm frame moves 5.37-6.88 m³/min airflow
  • Ball bearings rated 30,000 hours at 40 °C
  • 110-120 V AC input with 1500 V withstand rating
  • Die-cast aluminium frame resists corrosion and moisture
  • 25 cm lead wires simplify cabinet or server installation

Specifications

Fan Size170mm

Questions about this item

How much noise and heat does the 170 mm AC fan generate when running continuously at 2700-3100 RPM?

The ball-bearing motor spins at 2700-3100 RPM and moves 5.37-6.88 m³/min of air; expect audible airflow and motor hum typical of a 38 W AC axial fan in a server chassis.

What power connection must I already have to run this 110-120 V AC fan?

It needs a mains-voltage supply — two 25 cm leads for direct wiring to 110-120 V AC at 50/60 Hz drawing 0.50 A.

Will the 172×150×51 mm frame and 38 W draw fit the same cut-out and power budget as my older 170 mm AC fans?

The die-cast aluminium frame measures 172×150×51 mm with standard mounting centres, and the 38 W rating matches legacy 170 mm AC units, so it slots into existing cut-outs and circuits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.