We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 7 cm black blower fan with four-wire PWM connector

SXDOOL

SXDOOL FD7015H12D 12V 0.43A 7 cm case fan

SKU CH-R4EJ-CHKWV MPN FD7015H12D

A 7 cm blower fan with dual ball bearings delivers 10.75 CFM at up to 4800 RPM under 4-wire PWM control

  • Adjustable cooling with 1000–4800 RPM PWM control
  • Dual ball bearings rated for 80000 hours life
  • 75 CFM airflow at 4800 RPM peak speed
  • Operates from 10.8 V to 13.2 V range
  • 49 dBA noise at maximum 4800 RPM speed

12 V PWM case fan with dual ball bearing

The FD7015H12D is a 7 cm blower-style fan built for server and industrial chassis. It runs on 12 V DC with a 0.43 A draw and uses a four-wire PWM circuit for automatic speed control. Dual ball bearings support a rated life of 80,000 hours.

Suited for tight 1U or blade servers needing

This fan delivers 10.75 CFM at up to 4,800 RPM, making it appropriate for high-density enclosures where directed cooling is required. The 49 dBA noise level at maximum speed rules it out for quiet workstations or home-theatre PCs. Builders who need larger-diameter fans or lower acoustic profiles should consider other form factors.

4-wire PWM speed control from 1,000 to 4,800 RPM

The PWM interface lets the motherboard or fan controller vary speed between 1,000 and 4,800 RPM within a ±10 % tolerance. This range is the decisive specification: verify that your board supplies a standard PWM header and that the target component can operate within this speed window before purchasing.

Highlights

  • Adjustable cooling with 1000–4800 RPM PWM control
  • Dual ball bearings rated for 80000 hours life
  • 75 CFM airflow at 4800 RPM peak speed
  • Operates from 10.8 V to 13.2 V range
  • 49 dBA noise at maximum 4800 RPM speed

Specifications

No published specifications for this item yet.

Questions about this item

Will this FD7015H12D blower fan fit the 4-pin PWM header on my current motherboard?

Yes, the fan uses a standard 4-wire PWM connector that plugs directly into any 4-pin CPU or chassis fan header supplying 12 V.

If I keep my existing 3-pin case fans on the same controller, will the FD7015H12D still respond to PWM signals independently?

The fan accepts PWM control from 1000 to 4800 RPM while 3-pin fans on the same controller run at fixed voltage; each header manages its own signal.

How can I confirm the FD7015H12D is running at its rated 10.75 CFM after installation?

At maximum PWM duty the fan should spin near 4800 RPM and produce 49 dBA; match those readings in BIOS or monitoring software to verify full airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.