We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black plastic 12V graphics cooling fan with seven curved blades and wire connector

SXDOOL

SXDOOL FD6525H12D 12V 6.6CM 37mm 25mm vga cooling

SKU CH-S0QT-K1PEK MPN FD6525H12D

Replacement 12 V graphics card fan for Sapphire RX 580, 570, 480 and 470 Platinum models, 6.6 cm diameter, 37 mm hole spacing, 25 mm thick

  • Designed for Sapphire RX 580, 570, 480, 470 Platinum cards
  • 12 V DC motor powers the FD6525H12D replacement fan
  • 6 cm diameter fits the original cooler shroud
  • 37 mm mounting-hole spacing matches the stock layout
  • 25 mm thickness clears the heatsink without modification

Replacement Fan for Sapphire Platinum GPUs

The SXDOOL FD6525H12D is a direct replacement cooler for Sapphire public-version graphics cards including the RX580, RX570, RX480 and RX470 Platinum models. It matches the original FD6525H12D and BFB0712HF specifications exactly. This 12 V unit restores stock cooling performance when the original fan fails or becomes noisy. Buyers must verify their specific card model and fan appearance before ordering.

6.6 cm Diameter with 37 mm Mounting

The fan measures 6.6 cm across with a 25 mm thickness and a 37 mm hole spacing. These dimensions fit the designated Sapphire Platinum heatsink shrouds without modification. The 12 V DC motor drives the turbo-style blade at factory speeds. This part addresses thermal throttling caused by worn bearings or damaged blades. It does not fit reference-design cards, custom PCB variants or models with different mounting patterns.

Upgrade from Failed or Loud Stock Coolers

This component replaces a defective original fan on the listed Sapphire Platinum boards. The swap is worthwhile when GPU temperatures climb under load or the original unit develops a rattle. It returns the card to its intended thermal envelope without requiring a full heatsink change. The jump is not worth it for cards with intact, quiet fans or for GPUs outside the RX470, RX480, RX570 and RX580 Platinum range.

Highlights

  • Designed for Sapphire RX 580, 570, 480, 470 Platinum cards
  • 12 V DC motor powers the FD6525H12D replacement fan
  • 6 cm diameter fits the original cooler shroud
  • 37 mm mounting-hole spacing matches the stock layout
  • 25 mm thickness clears the heatsink without modification

Specifications

No published specifications for this item yet.

Questions about this item

Will the 37mm hole spacing on this FD6525H12D fan line up with the mounting holes on my Sapphire RX 580?

The FD6525H12D is built for Sapphire public-version RX 580, RX 570, RX 480 and RX 470 Platinum cards and uses a 37mm hole distance that matches those models.

How can I confirm the 12V FD6525H12D is spinning correctly after I install it?

Connect the fan to the graphics card header, power on the system and verify the blade spins smoothly at 12V while monitoring GPU temperatures under load.

Does the FD6525H12D package include mounting screws or a power adapter, or must I buy them separately?

The fan is supplied as the FD6525H12D / BFB0712HF unit only; mounting screws and any required power adapters are not included and must be sourced separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.