We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 90mm frame fan with transparent blades and two-wire connector

SXDOOL

SXDOOL FD129225HB-N 90mm 2-pin case fan

SKU CH-NK6E-XVE6P MPN FD129225HB-N

90 mm case fan delivering 60–65 CFM at 2500–2999 RPM with 30–35 dBA noise on a 2-pin connector

  • Fan Size90mm
  • RPM2500-2999 RPM
  • Air Flow60-65 CFM
  • Noise Level30 - 35 dBA
  • Power Connector2 Pin
  • 90 mm frame fits tight chassis spaces
  • 2,500–2,999 RPM delivers 60–65 CFM airflow
  • 30–35 dBA keeps system noise low
  • 2-pin 12 V connector installs without adapters
  • Double ball bearing rated 75,000 hours for long life

Compact 90 mm 2-pin case fan

The SXDOOL FD129225HB-N is a 90 mm square frame fan with a 2-pin power connector. It draws 0.23 A at 12 V for 2.76 W and uses a double ball bearing rated for 75 000 hours. The unit suits builders who need a slim 9025 form factor for tight chassis or replacement cooling.

Steady airflow at 2800 RPM

Under continuous operation the fan runs between 2500 and 2999 RPM, delivering 60 to 65 CFM at a noise level of 30 to 35 dBA. The double ball bearing maintains consistent speed without the wear that sleeve bearings show after extended duty cycles.

Check 2-pin header and 90 mm mounting

Verify that your motherboard or fan controller provides a 2-pin header and that the case offers 90 mm mounting holes with 25 mm depth clearance. The 2-line wiring does not support PWM speed control, so the fan will run at full voltage whenever powered. Buyers who need variable speed or larger frame sizes should look elsewhere.

Highlights

  • 90 mm frame fits tight chassis spaces
  • 2,500–2,999 RPM delivers 60–65 CFM airflow
  • 30–35 dBA keeps system noise low
  • 2-pin 12 V connector installs without adapters
  • Double ball bearing rated 75,000 hours for long life

Specifications

Fan Size90mm
RPM2500-2999 RPM
Air Flow60-65 CFM
Noise Level30 - 35 dBA
Power Connector2 Pin

Questions about this item

How loud is the 90mm fan at 2500-2999 RPM during continuous operation?

The fan produces 30-35 dBA at its rated speed of 2500-2999 RPM, with the manufacturer citing 37.5 dBA at 2800 RPM.

Does the 2-pin connector require a specific motherboard header or fan controller to run?

It uses a standard 2-pin DC connector for 12 V power and draws 0.23 A (2.76 W), compatible with any 12 V 2-pin header.

Will the 90mm frame fit the same mounting holes as my existing 92mm fans?

The frame measures 90×90×25 mm, while the supplier also lists 92×92×25 mm; hole spacing may differ, so verify your case or heatsink pattern before installing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.