We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 80mm square frame case fan 15mm thick non LED hydro wave bearing 3 pin power connector

SXDOOL

SXDOOL FBK08T24H 80mm 24V 0.17A Hydro Wave case fan

SKU CH-09QC-R2101 MPN FBK08T24H

80 mm Hydro Wave case fan runs on 24 V DC at 0.17 A with a 70 000-hour hydraulic bearing

  • TypeCase Fan
  • Fan Size80mm
  • Bearing TypeHydro Wave
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 80 mm frame fits compact builds
  • Hydro Wave bearing rated for 70000 hours
  • 24 V 0.17 A draws minimal power
  • Alarm detection signal supports FANUC monitoring
  • 15 mm thick profile suits tight clearance

80 mm 24 V Case Fan for Industrial Systems

The SXDOOL FBK08T24H is an 80 mm case fan designed for 24 V DC power rails. It suits maintenance teams repairing FANUC lathe equipment or builders integrating cooling into industrial control cabinets. The three-pin connector provides a standard tachometer signal for speed monitoring.

Hydro Wave Bearing with 70000 Hour Rating

A Hydro Wave hydraulic bearing targets a 70000 hour service life, reducing the frequency of replacements in continuous-operation environments. The 80 by 80 by 15 mm frame fits standard 8015 mounting holes, while the black non-LED housing keeps the visual profile neutral for professional installations.

0.17 A Draw on 24 V Supply

At 0.17 A current draw, the fan imposes a minimal load on a 24 V power supply. The hydrodynamic bearing typically runs quieter than sleeve alternatives at equivalent speeds. The alarm detection wire alerts the host system immediately if the rotor stalls or slows below threshold.

Highlights

  • 80 mm frame fits compact builds
  • Hydro Wave bearing rated for 70000 hours
  • 24 V 0.17 A draws minimal power
  • Alarm detection signal supports FANUC monitoring
  • 15 mm thick profile suits tight clearance

Specifications

TypeCase Fan
Fan Size80mm
Bearing TypeHydro Wave
Power Connector3 Pin
ColorBlack
LEDNon-LED

Questions about this item

What 3-pin connector standard does the FBK08T24H use, and what 24V current does it draw?

The fan uses a standard 3-pin power connector and draws 0.17A at 24V DC.

Will the 80mm by 15mm frame with 8015 mounting holes fit my FANUC enclosure?

The 80mm square frame is 15mm thick and matches the 8015 mounting pattern used in FANUC systems.

How do I install the hydro wave bearing fan so the alarm detection works correctly?

Connect the three-pin header to the motherboard or controller; the third wire carries the tachometer signal for alarm detection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.