We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 90 mm case fan with black frame and 4-pin connector

SXDOOL

SXDOOL EF92251S1-Q010-S9A 90 mm 4-pin PWM case fan

SKU CH-AW75-JPPC0 MPN EF92251S1-Q010-S9A

A 90 mm PWM case fan with a 4-pin connector running on 12 V DC at 3.83 W

  • Fan Size90mm
  • Power Connector4 Pin
  • 90 mm frame fits tight 9025 chassis slots
  • 25 mm thickness matches standard 9225 mounting depth
  • 4-pin PWM connector enables motherboard speed control
  • 12 V DC input draws 3.83 W rated power
  • SUNON EF92251S1-Q010-S9A model built for inverter cooling

Compact 90 mm PWM case fan

The SXDOOL EF92251S1-Q010-S9A is a 90 mm square frame fan measuring 25 mm thick. It runs on 12 V DC and draws 3.83 W through a standard 4-pin PWM connector for automatic speed control.

Suited to tight chassis and targeted airflow

Builders fitting a 90 mm mount in a small-form-factor case or using the fan for spot cooling on a heatsink will match the 9025 footprint. Anyone needing a different frame depth, a 3-pin voltage-controlled header, or a larger mounting pattern should choose another model.

90 mm frame with 4-pin PWM control

The 90 mm by 90 mm by 25 mm dimensions and 4-pin PWM interface are the single specification that decides fit. Verify the case or heatsink accepts a 9025 fan and that the motherboard or controller provides a 4-pin PWM header before purchasing.

Highlights

  • 90 mm frame fits tight 9025 chassis slots
  • 25 mm thickness matches standard 9225 mounting depth
  • 4-pin PWM connector enables motherboard speed control
  • 12 V DC input draws 3.83 W rated power
  • SUNON EF92251S1-Q010-S9A model built for inverter cooling

Specifications

Fan Size90mm
Power Connector4 Pin

Questions about this item

Does my motherboard need a 4-pin PWM header to run this 90 mm fan?

Yes, the fan uses a 4-pin connector and requires a 4-pin PWM header for speed control.

Will this 90x90x25 mm fan fit in the same mounting holes as my old 9025 fan?

Yes, the 90 mm square frame and 25 mm thickness match the standard 9025 mounting pattern.

How can I confirm the fan is spinning at the correct PWM duty cycle after installation?

Check the RPM reading in BIOS or monitoring software; it should vary smoothly with the PWM signal sent to the 4-pin header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.