We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 12V cooling fan 30x30x10mm black frame two wires

SXDOOL

SXDOOL DFS301012L 30x30x10mm 12V case fan

SKU CH-S3BA-DVC00 MPN DFS301012L

A compact 30x30x10mm 12V case fan drawing 0.7W with a two-pin connector

  • Compact 30×30×10 mm frame fits tight chassis spaces
  • 12 V DC input suits standard PC power rails
  • Low 0.7 W draw keeps system power budget minimal
  • Two-pin connector enables simple motherboard or controller hookup
  • 3010 form factor matches common small-factor cooling mounts

Compact 3010 form factor

The SXDOOL DFS301012L is a 30mm square case fan with a 10mm thickness. It connects via a standard 2-wire 2-pin header and runs on 12V DC power. This size suits tight chassis spaces or small-form-factor builds where larger fans cannot fit.

Sustained airflow at low power

The motor draws 0.7W at 12V, delivering continuous airflow without the spike-and-drop pattern seen in higher-wattage models. Steady current keeps RPM stable during long sessions, so cooling remains consistent when the system stays under load for hours.

Quiet operation with minimal heat

Low wattage means the fan adds little waste heat to the case interior. The 2-pin design runs at a fixed speed, avoiding PWM whine, and the small blade diameter keeps acoustic output low during normal use. Power draw stays negligible on any 12V rail.

Highlights

  • Compact 30×30×10 mm frame fits tight chassis spaces
  • 12 V DC input suits standard PC power rails
  • Low 0.7 W draw keeps system power budget minimal
  • Two-pin connector enables simple motherboard or controller hookup
  • 3010 form factor matches common small-factor cooling mounts

Specifications

No published specifications for this item yet.

Questions about this item

How loud and warm does the 30×30×10 mm fan get when running continuously at 12 V?

The 0.7 W draw keeps heat output low; with no speed or noise ratings supplied, expect typical small-fan acoustics under constant 12 V operation.

What connector must my motherboard or controller provide for the 2-pin plug?

A standard two-pin 12 V header is required; the fan has no PWM wire, so speed is controlled by voltage only.

Will the 3010 frame fit the mounting holes on my older 30 mm chassis brackets?

Yes — the 30 mm × 30 mm × 10 mm dimensions match the common 3010 footprint used on legacy small-form-factor brackets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.