SXDOOL
SXDOOL d5010t12l 50 mm 12 V 0.15 A ball-bearing case fan
A 50 mm ball-bearing fan with an aluminium heatsink, running at 4200 rpm and 25 dB while drawing 0.15 A at 12 V
- Ball-bearing design for long-term reliability at 4200 rpm
- Quiet 25 dB operation keeps systems distraction-free
- 12 V 0.15 A draws only 1.8 W of power
- Detachable heatsink with conductive sheet for flexible cooling
- 17 cm lead with magnetic ring reduces cable interference
Compact 50 mm 12 V ball-bearing fan
The SXDOOL d5010t12l is a 50 mm square case fan that runs on 12 V and draws 0.15 A. Its two-wire plug includes a 17 cm lead with an anti-interference magnetic ring. The ball-bearing motor spins at 4200 rpm and produces 10.73 CFM at 25 dB.
Detachable heatsink with pressure plate
An aluminium-alloy heatsink measuring 7 x 6.3 x 1.2 cm ships attached to the fan frame. A pressure plate and heat-conducting gasket are included so the assembly can stay together or be separated for alternative mounting. The combined unit weighs 83 g.
Low-profile cooling for tight spaces
The fan-and-heatsink package fits in cramped chassis where larger coolers cannot go. It delivers modest airflow for low-power components such as chipset heatsinks or small-form-factor builds. The 1.8 W draw and 25 dB noise level suit quiet systems, but the 10.73 CFM rating limits use to low-heat loads.
Highlights
- Ball-bearing design for long-term reliability at 4200 rpm
- Quiet 25 dB operation keeps systems distraction-free
- 12 V 0.15 A draws only 1.8 W of power
- Detachable heatsink with conductive sheet for flexible cooling
- 17 cm lead with magnetic ring reduces cable interference
Specifications
No published specifications for this item yet.
Questions about this item
Will the ball bearing need lubrication or replacement after long use?
The ball bearing is sealed and rated for continuous operation at 4200 rpm without a published relubrication interval.
What limits airflow when the fan runs at 4200 rpm for hours?
The 10.73 CFM rating and 25 dB noise level are the steady-state limits; higher static pressure from a dense heatsink will reduce actual flow.
How much heat and noise does the 1.8 W motor add to a chassis running all day?
It draws 0.15 A at 12 V, producing 1.8 W of waste heat and a measured 25 dB at 4200 rpm.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
