We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 90mm frame fan with 2-pin connector

SXDOOL

SXDOOL D09A-12TU03 90mm 12V 0.2A ball bearing case fan

SKU CH-8D7K-9AM9F

90mm 12V ball-bearing case fan spins at 3100rpm delivering 56.5cfm at 38dba

  • Fan Size90mm
  • Power Connector2 Pin
  • 90 mm frame fits standard 92 mm mounts
  • Ball bearing rated for long continuous operation
  • 3100 rpm delivers 56.5 cfm airflow
  • 38 dBA noise level suits quiet builds
  • 12 V 0.2 A draws only 2.4 W power

Compact 90 mm cooling fan

The SXDOOL D09A-12TU03 is a 90 mm case fan built around a Nidec ball-bearing motor. It runs on a 12 V two-pin connector and draws 0.2 A for 2.4 W of power. The impeller reaches 3100 rpm and moves 56.5 cfm at a listed 38 dBA. It fits 90 × 90 × 25 mm or 92 × 92 × 25 mm mounting holes.

Suits tight industrial or legacy chassis

This unit suits technicians servicing Fuji inverters or compact enclosures that require a 90 mm frame and two-pin power. It does not suit builders who need PWM speed control, larger frame sizes, or higher static pressure for dense radiators.

Two-pin 12 V power connector

The fan uses a fixed-speed two-pin 12 V connector, so speed cannot be regulated by the motherboard. Verify that your device supplies a constant 12 V two-pin header before ordering.

Highlights

  • 90 mm frame fits standard 92 mm mounts
  • Ball bearing rated for long continuous operation
  • 3100 rpm delivers 56.5 cfm airflow
  • 38 dBA noise level suits quiet builds
  • 12 V 0.2 A draws only 2.4 W power

Specifications

Fan Size90mm
Power Connector2 Pin

Questions about this item

Does the SXDOOL D09A-12TU03 fan ship with mounting screws or a fan filter included?

The box contains the 90mm ball-bearing fan with its 2-pin power connector; mounting screws and any filter are not included and must be sourced separately.

Should I choose the 90×90×25 mm or the 92×92×25 mm frame for my Fuji inverter?

Both frame sizes share the same 12 V, 0.2 A, 3100 rpm specification; select the one that matches the mounting hole pattern of your inverter chassis.

What does the 56.5 CFM airflow rating mean once the fan is installed in a server case?

At 3100 rpm the fan moves 56.5 CFM through a 90 mm frame, delivering targeted cooling for inverter components while producing 38 dBA of noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.