We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80mm Nidec case fan with 25mm depth and short 3-pin cable

SXDOOL

SXDOOL D08K-24TU 13B (AX) 24V 0.13A 8025 power inverter

SKU CH-GWFM-F9ATH

80 mm square case-fan accessory with NBR bearing, 24 V 0.13 A rating and 50 000-hour service life

  • TypeCase Fan Accessory
  • Compact 80×80×25 mm footprint fits tight server bays
  • NBR bearing rated for 50000 hours of continuous operation
  • Runs on 24 V at just 0.13 A for low power draw
  • Original small 3P interface ensures direct, tool-free connection
  • 5 cm cable keeps wiring neat inside the chassis

NIDEC 8025 inverter for copier cooling

The SXDOOL D08K-24TU 13B (AX) is a NIDEC-branded power inverter designed as a case fan accessory for copier cooling systems. It operates at a rated voltage of 24V and draws 0.13A of current. The unit measures 80mm by 80mm by 25mm and uses an NBR bearing rated for 50000 hours of service life. A 5cm cable with an original small 3P interface connects the device.

Limited by the original small 3P interface

The inverter connects via an original small 3P interface, which restricts compatibility to equipment designed for that specific connector. The 5cm cable length limits placement options inside a chassis or copier frame. No alternative connectors or extension cables are included. Builders must verify their hardware matches this exact interface before purchase.

24V 0.13A rating decides fit

The single specification that determines whether this inverter is the correct part is the combined 24V voltage and 0.13A current rating. If the target device requires a different voltage or draws significantly more current, this unit will not function correctly. Buyers who need a different voltage or higher amperage should look elsewhere.

Highlights

  • Compact 80×80×25 mm footprint fits tight server bays
  • NBR bearing rated for 50000 hours of continuous operation
  • Runs on 24 V at just 0.13 A for low power draw
  • Original small 3P interface ensures direct, tool-free connection
  • 5 cm cable keeps wiring neat inside the chassis

Specifications

TypeCase Fan Accessory

Questions about this item

Which capacity should I pick for the D08K-24TU 13B (AX) fan?

The unit is a single 24 V 0.13 A model with an 80 mm × 80 mm × 25 mm frame, so there are no alternate capacities to choose from.

What does the 0.13 A rating mean once the fan is installed?

At 24 V the fan draws 0.13 A, giving a power draw of about 3 W during normal operation.

What does the original small 3P interface cap in practice?

The 3-pin connector supplies 24 V power and a tachometer signal, limiting control to voltage regulation or on/off switching.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.