We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

SXDOOL

SXDOOL d05x-12tl 50mm 12V case fan

SKU CH-CT1G-YM2DY MPN d05x-12tl

A 50 mm 12 V dual-ball-bearing case fan rated for 80 000 hours at 25 °C

  • TypeCase Fan
  • 50 mm footprint fits tight chassis spaces
  • 12 V DC operation draws only 0.05 A
  • Magnetic bearing rated for 80000 hours at 25 °C
  • Runs from -10 °C to 70 °C ambient
  • Speed signal enables real-time RPM monitoring

Compact 50 mm case fan for tight builds

The SXDOOL d05x-12tl is a 50 mm square frame fan designed for 12 V DC operation in confined spaces. Its low 0.72 W power draw suits small-form-factor PCs, industrial boards and northbridge or southbridge heatsinks where larger fans cannot fit.

Magnetic-bearing motor rated for 80 000 hours

The magnetic bearing replaces traditional ball or sleeve designs to reduce friction and extend service life to 80 000 hours at 25 °C ambient. Continuous operation is specified from -10 °C to 70 °C, with storage tolerance down to -40 °C.

Simple two-wire install.

The fan connects via standard two-wire 12 V leads and fits any 50 mm mounting pattern with 5 mm screw holes. Verify the 10 mm thickness clears nearby components and observe correct polarity; the 15 % voltage tolerance means a regulated 12 V source is preferred.

Highlights

  • 50 mm footprint fits tight chassis spaces
  • 12 V DC operation draws only 0.05 A
  • Magnetic bearing rated for 80000 hours at 25 °C
  • Runs from -10 °C to 70 °C ambient
  • Speed signal enables real-time RPM monitoring

Specifications

TypeCase Fan

Questions about this item

What does the 0.05 A current draw mean for my 12 V rail?

It adds only 0.72 W of load, so the fan will not stress a standard 12 V supply even with several units running.

How does the magnetic bearing affect noise and lifespan?

Magnetic levitation removes physical contact, giving quieter operation and a rated 80000 hours at 25 °C ambient.

Will the 50 × 50 × 10 mm frame fit my motherboard’s chipset header?

The 5010 form factor matches standard 50 mm mounting holes; verify the header supplies 12 V within ±15 % and uses a compatible connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.