We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square frameless graphics card fan with 4-pin connector

SXDOOL

SXDOOL BASO71OR2UDiameter 65mm 12V 0.5A 4-pin vga cooling

SKU CH-Z0FT-5HF82 MPN BASO71OR2UDiameter

A 65 mm graphics-card fan with 35 mm mounting holes, 12 V 0.5 A draw, magnetic-suspension hydraulic bearing and 4-pin PWM control up to 4000 RPM

  • TypeCPU Cooler Fan
  • Power Connector4 Pin
  • 65 mm frameless design fits tight GPU clearances
  • Magnetic suspension hydraulic bearing reduces friction for quieter operation
  • 0-4000 RPM range scales airflow to thermal load
  • 4-pin PWM connector enables automatic speed control
  • 35 mm mounting holes match common graphics-card layouts

Frameless VGA cooler for compact graphics cards

The SXDOOL BASO71OR2U is a 65 mm frameless fan designed as a direct replacement cooler for graphics cards. It suits builders servicing cards with a 35 mm mounting-hole spacing who need a 12 V, 0.5 A PWM-controlled unit.

Sustained airflow with magnetic suspension

The magnetic suspension hydraulic bearing supports a 0-4000 RPM range under continuous PWM regulation. This design maintains consistent speed control during extended loads without the wear associated with sleeve bearings.

Verify mounting holes and connector before ordering

Confirm your graphics card uses a 35 mm hole distance and accepts a 4-wire 4-pin PWM plug. The frameless body requires exact alignment with the PCB mounting points for secure installation.

Highlights

  • 65 mm frameless design fits tight GPU clearances
  • Magnetic suspension hydraulic bearing reduces friction for quieter operation
  • 0-4000 RPM range scales airflow to thermal load
  • 4-pin PWM connector enables automatic speed control
  • 35 mm mounting holes match common graphics-card layouts

Specifications

TypeCPU Cooler Fan
Power Connector4 Pin

Questions about this item

How much noise and heat does the 65 mm magnetic-suspension hydraulic fan produce when running at 4000 RPM all day?

The fan spins from 0 to 4000 RPM under PWM control, so noise and airflow scale with GPU temperature rather than running at a fixed maximum.

What connector must my graphics card already have to plug in this 4-pin VGA cooler?

It requires a graphics-card 4-wire 4-pin PWM header on the board.

Will the 35 mm mounting-hole spacing fit the older GPU I plan to keep?

The cooler uses a 35 mm hole distance; check your card’s screw layout against that measurement before installing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.