SXDOOL
SXDOOL AFB0612VHC 60mm 12V 0.36A 6013 dual ball case fan
A 60mm dual ball bearing case fan running at 5400rpm with 38dB noise on a 12V 0.36A supply
- Fan Size60mm
- Power Connector4 Pin
- 60 mm compact footprint fits tight chassis spaces
- Dual ball bearings extend operating life under continuous loads
- 5400 RPM nominal speed moves high airflow for targeted cooling
- 12 V 0.36 A draw keeps power demand low
- 38 dB noise level suits quiet-build requirements
60 mm dual-ball case fan
The SXDOOL AFB0612VHC is a 60 mm square frame fan with a 13 mm thickness designed for 12 V DC operation. It uses a dual ball bearing and a 4-pin power connector to deliver speed control and monitoring in tight chassis spaces.
Suits builds needing high RPM in a 6013 form factor
This unit spins at a nominal 5400 RPM within a 5000 to 5499 RPM range and produces 38 dB of noise, so it fits compact servers or small-form-factor PCs that can tolerate audible airflow. Buyers who need silent operation or a larger frame size should look elsewhere.
4-pin PWM connector for automatic speed control
The 4-pin header enables motherboard-regulated PWM control so the fan runs only as fast as required. If your board or controller only offers 3-pin voltage regulation, you will not gain the full automatic speed range.
Highlights
- 60 mm compact footprint fits tight chassis spaces
- Dual ball bearings extend operating life under continuous loads
- 5400 RPM nominal speed moves high airflow for targeted cooling
- 12 V 0.36 A draw keeps power demand low
- 38 dB noise level suits quiet-build requirements
Specifications
| Fan Size | 60mm |
|---|---|
| Power Connector | 4 Pin |
Questions about this item
How can I verify the AFB0612VHC is spinning at the rated 5400 rpm after installation?
Connect the 4-pin connector to a motherboard header or fan controller, then monitor the RPM readout in BIOS or a hardware utility; it should settle around 5400 rpm at full voltage.
What comes in the box with the AFB0612VHC and what must I source separately?
The package contains the 60 mm dual-ball-bearing fan with pre-attached lead wires; mounting screws and any fan-filter or PWM cable are not included.
Which AFB0612VHC version should I choose for a 12 V system that needs 38 dB noise and 2.88 W power draw?
The single listed model AFB0612VHC is rated 12 V, 0.36 A, 5400 rpm, 38 dB and 2.88 W, so it matches those requirements directly.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



