We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 80mm black frame fan with seven translucent blades and two-wire lead

SXDOOL

SXDOOL AD0824HS-A70GL 80mm 24V 0.16A case fan

SKU CH-MGZJ-02WJP MPN AD0824HS-A70GL

80 mm case fan running at 3000 RPM on 24 V with 38.65 CFM airflow and 35.2 dB/A noise

  • TypeCase Fan
  • Fan Size80mm
  • Power Connector2 Pin
  • 80 mm frame fits standard case mounts
  • 24 V DC operation for industrial and server power rails
  • Hydraulic bearing reduces friction for longer service life
  • 3000 RPM delivers 38.65 CFM airflow at 35.2 dB/A
  • PBT housing with 30 % glass fibre meets 94V-0 flammability rating

80 mm 24 V case fan for industrial cooling

The SXDOOL AD0824HS-A70GL is an 80 mm case fan that runs on 24 V DC and draws 0.16 A. Its hydraulic bearing and 3000 RPM speed deliver 38.65 CFM airflow with 1.09 mm wind pressure at 35.2 dB/A. The frame and blades use PBT with 30 % glass fibre and a 94V-0 flame rating.

Suits 24 V systems needing a two-pin 80 mm fan

This fan fits equipment that supplies a 24 V two-pin header and accepts an 80 × 80 × 25 mm frame. It is not suited for builds that provide a different voltage header, require PWM speed control or need a three-pin or four-pin connector. Buyers who need lower noise or higher static pressure should look at alternative models.

24 V 0.16 A two-pin power specification

The decisive specification is the 24 V 0.16 A rating on a two-pin connector. Verify that your chassis or controller provides exactly this voltage and connector before ordering.

Highlights

  • 80 mm frame fits standard case mounts
  • 24 V DC operation for industrial and server power rails
  • Hydraulic bearing reduces friction for longer service life
  • 3000 RPM delivers 38.65 CFM airflow at 35.2 dB/A
  • PBT housing with 30 % glass fibre meets 94V-0 flammability rating

Specifications

TypeCase Fan
Fan Size80mm
Power Connector2 Pin

Questions about this item

Does the 2-pin power connector plug directly into a 24 V DC header on my board?

The fan uses a 2-pin connector and is rated for 24 V DC at 0.16 A, so it requires a header that supplies 24 V.

Will the 80 mm frame with 25 mm thickness fit the same mounting holes as my existing 8025 fans?

Yes, the 80×80×25 mm dimensions match the standard 8025 form factor, so existing mounting holes align.

How can I confirm the fan is running at its rated 3000 RPM after installation?

Monitor the fan speed in BIOS or software; a reading near 3000 RPM with airflow around 38.65 CFM and noise near 35.2 dB/A shows it is operating as specified.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.