We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 80mm square case fan with red and black wires and white plug

SXDOOL

SXDOOL AD0805LX-A70GL 80mm 5V 0.23A Hypro case fan

SKU CH-WXK7-YSK2H

80 mm DC axial fan with Hypro bearing, 5 V 0.23 A, red/black leads and white 2-position plug

  • 5 V DC and 0.23 A draw keeps power use low
  • Hypro bearing design reduces friction for quieter operation
  • 80 × 80 × 25 mm frame fits standard 80 mm mounts
  • Red and black leads with white 2-position plug simplify wiring
  • Exact model AD0805LX-A70GL ensures correct replacement match

80 mm 5V DC case fan

The SXDOOL AD0805LX-A70GL is an 80 x 80 x 25 mm axial fan rated for 5V DC and 0.23 A. It uses an ADDA Hypro bearing and ships with red and black 2-wire leads ending in a white 2-position plug. One fan is included per pack. Verify the complete model label before ordering.

Suitable for 5 V low-current cooling slots

This fan fits equipment-cooling assemblies that require an 80 mm frame, 5 V supply and a two-wire connection. Builders needing a higher voltage, a larger frame, a three- or four-wire PWM interface or a different bearing type should look at other models. Match the original fan voltage and connector exactly before purchase.

5 V 0.23 A electrical rating

The decisive specification is the 5 V DC, 0.23 A rating printed on the fan label. Only systems designed for this exact voltage and current should use this unit. Supplying a different voltage or exceeding the rated current will damage the fan or the host equipment. Compare the label data with the original part before installation.

Highlights

  • 5 V DC and 0.23 A draw keeps power use low
  • Hypro bearing design reduces friction for quieter operation
  • 80 × 80 × 25 mm frame fits standard 80 mm mounts
  • Red and black leads with white 2-position plug simplify wiring
  • Exact model AD0805LX-A70GL ensures correct replacement match

Specifications

No published specifications for this item yet.

Questions about this item

Will the 80 x 80 x 25 mm frame and 5 V 0.23 A rating fit my existing 80 mm mounting points and power header?

The fan uses an 80 x 80 x 25 mm frame and draws 0.23 A at 5 V DC. Verify that your chassis has matching 80 mm screw holes and that the header supplies 5 V at or above 0.23 A before installing.

How can I confirm the Hypro bearing is running correctly once the fan is connected?

Power the system and listen for smooth, steady rotation without grinding or rattling. The red and black 2-wire leads with the white 2-position plug should deliver 5 V to the motor; consistent airflow through the 80 mm frame indicates normal operation.

What comes in the package and which cables or adapters must I source separately?

The box contains one ADDA AD0805LX-A70GL fan with red and black 2-wire leads ending in a white 2-position plug. No mounting screws, voltage adapters or alternative connectors are included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.