We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80mm frame with transparent blades and LED lighting, 25mm thick, three-pin connector visible

SXDOOL

SXDOOL A8025-18CB-5BN-L1 12V 80x80x25mm case fan

SKU CH-E8M4-KRSYQ MPN A8025-18CB-5BN-L1

An 80 mm ball-bearing case fan delivering 20.84 CFM at 1500 RPM with 22 dB-A noise

  • Quiet operation at 22 dB-A for low-noise builds
  • 12 V DC power with 0.12 A draw for efficient cooling
  • 84 CFM airflow moves air through tight spaces
  • Ball bearing rated for 30,000 hours of continuous use
  • 3-pin speed sensor enables motherboard fan control

80 mm 12 V case fan for compact builds

The SXDOOL A8025-18CB-5BN-L1 is an 80 mm square frame fan designed for 12 V DC systems. It suits small-form-factor cases or tight spots where larger fans will not fit. The 3-pin connector provides speed reporting so the motherboard can monitor rotation.

22 dB-A noise at 1500 RPM with ball bearing

At 1500 RPM the fan moves 20.84 CFM and generates 1.78 mmH2O of static pressure while drawing 2.52 W at 0.12 A. Acoustic output is rated at 22 dB-A. A ball bearing supports the 30 000-hour life rating and keeps friction low during continuous operation.

20 cm lead and speed sensor included

The 20 cm cable reaches nearby headers without excess slack. A tachometer wire feeds real-time RPM data to the board for fan-curve control. No RGB controller, PWM circuitry or mounting screws are bundled with the unit.

Highlights

  • Quiet operation at 22 dB-A for low-noise builds
  • 12 V DC power with 0.12 A draw for efficient cooling
  • 84 CFM airflow moves air through tight spaces
  • Ball bearing rated for 30,000 hours of continuous use
  • 3-pin speed sensor enables motherboard fan control

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 80x80x25mm case fan and which step is often missed?

Mount the fan with four screws through the 80mm frame holes, connect the 3-pin plug to a 12V motherboard header, and ensure the speed-sensor wire is seated so the BIOS can read the 1500 RPM signal.

What maintenance or replacement will the ball-bearing fan need later?

The ball bearing is rated for 30,000 hours; after that period the fan should be replaced because the bearing cannot be relubricated.

What limit appears first during sustained use at 1500 RPM?

The 2.52 W power draw and 22 dB-A noise level remain constant, so the 30,000-hour bearing life is the first limit reached under continuous operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.