We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square 75mm case fan black frame transparent blades

SXDOOL

SXDOOL 8015Size 75mm case fan 12V 2500 rpm 11 dBA

SKU CH-ASG1-PQ2EJ MPN 8015Size

Compact 75 mm case fan runs at 2500 rpm while producing just 11 dBA noise

  • Fan Size75mm
  • Quiet cooling at just 11 dBA noise
  • 2500 rpm airflow from compact 75 mm frame
  • 12 V DC power with low 0.18 A draw
  • Oil-bearing design for smooth long-life operation
  • Fits 42 mm hole pitch on 9800 GT and 9600 GT cards

75 mm 12 V Case Fan

This 75 mm case fan runs on 12 V and spins at 2500 rpm. It uses an oil bearing and a 2-pin 2.0 connector. The unit measures 75 x 15 mm with a 42 x 42 x 42 mm hole pitch. It is designed as a replacement cooler for graphics cards such as the 9800GT and 9600GT.

Suits Direct Replacement Needs

Builders replacing a failed 75 mm cooler on compatible graphics cards will find the correct dimensions and voltage here. The low noise rating of 11 dBA fits quiet systems. Buyers who need PWM speed control, a different mounting pattern, or a larger frame size should look elsewhere because this model is fixed at 2500 rpm with a 2-pin interface.

2500 rpm Fixed Speed

The single specification that decides fit is the fixed 2500 rpm speed combined with the 2-pin 2.0 connector. This means the fan runs at full speed whenever powered, with no motherboard or controller speed regulation. Verify that the target device accepts a constant 12 V 0.18 A draw and the exact 42 x 42 x 42 mm screw layout before ordering.

Highlights

  • Quiet cooling at just 11 dBA noise
  • 2500 rpm airflow from compact 75 mm frame
  • 12 V DC power with low 0.18 A draw
  • Oil-bearing design for smooth long-life operation
  • Fits 42 mm hole pitch on 9800 GT and 9600 GT cards

Specifications

BrandBINYEAE
Fan Size75mm

Questions about this item

Will this 75 mm fan fit the 42 mm mounting holes on my 9800 GT or 9600 GT graphics card?

Yes — the fan uses a 42×42×42 mm hole pitch that matches the reference cooler on those cards.

Can I run this 12 V, 0.18 A fan from a standard 2-pin motherboard header without PWM control?

The 2-pin 2.0 mm connector plugs directly into a 12 V header; speed stays fixed at 2500 rpm because there is no PWM wire.

How do I confirm the fan is spinning at the rated 2500 rpm and 11 dBA after installation?

Check the RPM reading in BIOS or monitoring software — it should report roughly 2500 rpm — and verify the airflow noise is barely audible at close range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.