We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular fan hub with eight 3-pin and 4-pin ports, SATA and Molex power inputs, three-position speed switch, adhesive backing

SXDOOL

SXDOOL 8-way fan hub speed controller internal power cable

SKU CH-SAZP-617D6

Connects up to eight 3-pin or 4-pin fans with three-speed control via SATA or Molex power and 3M adhesive mounting

  • Connect up to eight fans from one hub
  • Power via SATA or Molex 4-pin connector
  • Three-speed control with low, off and high settings
  • Secure mounting with thick 3M adhesive pad
  • Supports both 3-pin and 4-pin fan headers

8-way fan hub with SATA or MOLEX power

This internal cable hub connects up to eight 3-pin or 4-pin fans to a single SATA or 4-pin MOLEX connector from the power supply. A three-position switch on the controller sets LOW, OFF or HIGH speed for all attached fans. The unit mounts inside the case using pre-applied 3M adhesive.

PC builders needing simple grouped fan control

Enthusiasts who want per-fan PWM curves or software monitoring will not find those features here. The hub suits servers, workstations or custom rigs where a single manual speed setting for every fan is acceptable.

Three-speed hardware switch for eight fans

The only specification that decides fit is the three-gear switch (LOW, OFF, HIGH) driving all eight ports simultaneously. If your build requires individual fan curves or motherboard-controlled PWM, this hub will not meet that need.

Highlights

  • Connect up to eight fans from one hub
  • Power via SATA or Molex 4-pin connector
  • Three-speed control with low, off and high settings
  • Secure mounting with thick 3M adhesive pad
  • Supports both 3-pin and 4-pin fan headers

Specifications

No published specifications for this item yet.

Questions about this item

Which power input should I choose between the MOLEX 4D and SATA connectors?

Select the connector that matches your power supply's available cables; both deliver the same three-speed control to the hub.

What do the LOW, OFF and HIGH switch positions actually do to my fans?

LOW runs fans at reduced speed, HIGH runs them at full speed, and OFF stops them completely.

How does the SATA power connection limit the number of fans I can run?

The hub supports up to eight 3-pin or 4-pin fans regardless of whether you power it via SATA or MOLEX.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.