We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 70mm frame 15mm thick 12V .6A

SXDOOL

SXDOOL 7cm CPU Cooling Fan 12V 0.6A 70x70x15MM

SKU CH-9QJ5-C4N2V

A 7 cm case fan delivering 12 V, 0.6 A airflow for CPU cooling in a 70×70×15 mm frame

  • Efficient 12 V operation draws only .6 A
  • Compact 70 × 70 × 15 mm frame fits tight builds
  • Direct replacement for Cooler Master A7015 45RB 3AN C1
  • Reliable cooling for CPU or chassis intake
  • First listed by manufacturer on 31 May 2020

Product identity

The SXDOOL 7 cm fan is a 12 V 0.6 A case fan sized 70x70x15 mm. It fits Cooler Master A7015 45RB 3AN C1 DF0701512RFUN locations. The unit is sold new and first listed by the manufacturer on 31 May 2020.

Upgrade scope

This fan replaces a worn or noisy 70 mm cooler that uses the same 12 V 0.6 A specification. The jump is worth it when the original bearing fails or airflow drops below usable levels. Buyers who need higher static pressure or a different voltage should look elsewhere.

Installation notes

Mounting uses the standard four-hole 70 mm pattern so no adapters are required. What usually goes wrong is reusing old screws that strip the plastic frame or forgetting to reconnect the power header after the swap.

Highlights

  • Efficient 12 V operation draws only .6 A
  • Compact 70 × 70 × 15 mm frame fits tight builds
  • Direct replacement for Cooler Master A7015 45RB 3AN C1
  • Reliable cooling for CPU or chassis intake
  • First listed by manufacturer on 31 May 2020

Specifications

No published specifications for this item yet.

Questions about this item

Will the 70x70x15MM frame fit my Cooler Master A7015 cooler?

Yes, the 70 mm square frame and 15 mm thickness match the Cooler Master A7015 mounting pattern exactly.

How do I connect the 12V 0.6A fan to the motherboard header?

Plug the 3-pin connector into a 12 V fan header; align the guide key so the yellow sense wire sits on the correct pin.

When should I replace the 701512 fan if it starts rattling?

Replace it once bearing noise appears or RPM drops below spec, typically after several years of continuous 12 V operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.