We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black rectangular 12V 0.15A VGA cooling fan with three-pin connector

SXDOOL

SXDOOL 4510M12B NF1 12V 0.15A VGA Cooling

SKU CH-JJ3H-XMT07

12 V 0.15 A three-pin dual-ball bearing fan for graphics card or motherboard cooling

  • 12 V operation keeps your graphics card running at the correct voltage
  • 15 A draw minimises power load on the motherboard header
  • 3-wire 3-pin connector provides speed monitoring for fan control
  • Dual ball bearing design extends service life under continuous use
  • 4510 model fits the EPIA-N800 motherboard specification

Replacement VGA Cooling Fan

The SXDOOL 4510M12B NF1 is a 12 V 0.15 A dual-ball bearing fan designed for graphics card cooling. It serves as a direct replacement for the original cooler on the EPIA-N800 motherboard or compatible VGA assemblies.

Simple Three-Pin Installation

The unit uses a standard 3-wire 3-pin connector that plugs into the existing header without adapters. Dual ball bearings reduce the risk of early noise or seizure, and the low 0.15 A draw rarely stresses the board's fan circuit.

Match the 4510M12B Part Number

The critical specification is the exact manufacturer model 4510M12B NF1; only this part guarantees the correct mounting hole pattern, connector orientation and airflow direction. Buyers who need a different voltage, pin count or frame size cannot use this fan.

Highlights

  • 12 V operation keeps your graphics card running at the correct voltage
  • 15 A draw minimises power load on the motherboard header
  • 3-wire 3-pin connector provides speed monitoring for fan control
  • Dual ball bearing design extends service life under continuous use
  • 4510 model fits the EPIA-N800 motherboard specification

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the fan is running at the correct 12V and 0.15A after installation?

Monitor the fan header in BIOS or hardware-monitoring software to verify the 12 V supply and 0.15 A draw; the three-pin connector reports speed so you can see the RPM reading stabilise.

What comes in the box and are any mounting screws or adapters required separately?

The package contains the T&T 4510M12B NF1 fan with its 3-wire 3-pin lead; mounting hardware for the EPIA-N800 or graphics card is not included and must be sourced separately.

Which version of the 4510M12B NF1 should I choose for a 12 V 0.15 A three-pin header?

The single listed variant — 4510M12B NF1 rated at 12 V 0.15 A with a 3-wire 3-pin connector — matches that header exactly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.