We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small 36mm square 12V fan with 25mm mounting holes

SXDOOL

SXDOOL 4010 12V 36mm 25mm VGA Cooling

SKU CH-CK69-78Z3G

40 mm 12 V fan with 36 mm diameter and 25 mm hole spacing for graphics card cooling

  • Efficient GPU cooling with 12 V 0.14 A operation
  • Compact 36 mm diameter fits tight VGA spaces
  • 25 mm hole spacing matches standard mounting holes
  • Reliable 4010 frame design for graphics card use
  • Low power draw reduces system thermal load

SXDOOL 4010 12V VGA Cooling Fan

The SXDOOL 4010 is a 12 VDC graphics card cooling fan built around the T&T 4008M12F ND2 motor rated at 0.14 A. Its frame measures 36 mm across and uses a 25 mm hole spacing for mounting. The unit is supplied new and targets small-form-factor VGA thermal solutions.

Who This Suits and Who Should Look Elsewhere

This fan suits repair technicians or builders replacing a 36 mm, 12 V cooler with a 25 mm mounting pitch on graphics cards, north bridges, south bridges or embedded cash-register boards. It will not serve builds that need a larger frame, a different voltage or a wider mounting pitch.

Deciding Specification: 25 mm Hole Spacing

The 25 mm hole spacing is the single dimension that decides fitment. Measure the existing cooler’s mounting holes before ordering; if the pitch differs, this fan cannot be installed.

Highlights

  • Efficient GPU cooling with 12 V 0.14 A operation
  • Compact 36 mm diameter fits tight VGA spaces
  • 25 mm hole spacing matches standard mounting holes
  • Reliable 4010 frame design for graphics card use
  • Low power draw reduces system thermal load

Specifications

No published specifications for this item yet.

Questions about this item

Does my graphics card have a 25 mm hole spacing for this 4010 fan?

Measure the distance between the two mounting holes on the card's heatsink; it must match the 25 mm spacing of the 4010 frame.

Will the 4010 fan clear a northbridge heatsink on an older motherboard?

The 36 mm diameter and low profile leave enough room for most northbridge coolers, but verify the vertical clearance above your board.

How do I confirm the 12 V 0.14 A fan is spinning correctly after install?

Connect the fan to a 12 V header, power on, and watch the blades reach steady speed while listening for smooth, quiet operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.