SXDOOL
SXDOOL 2010Size 20x20x10mm 5V 12V 19000 RPM case fan
A 20x20x10mm case fan running at 19000 RPM on 5V or 12000 RPM on 12V with 25dBA noise and 40000-hour rated life
- Compact 20x20x10 mm size fits tight spaces
- Dual-voltage 5 V and 12 V operation for flexible power
- High-speed 19000 RPM at 5 V moves more air
- Quiet 25 dBA noise level at both voltages
- Long-life oil bearing rated for 40000 hours
Compact 20 mm Frame
The SXDOOL 2010Size is a 20 by 20 by 10 millimetre case fan built for tight spaces. It runs on either 5 volt or 12 volt rails, drawing 0.06 ampere at the lower voltage and 0.04 ampere at the higher one. Oil bearings are rated for 24 hours of continuous operation and a 40000 hour expected life.
Dual-Voltage Speed Choice
This fan suits builders who need a very small cooler that can switch between two speed profiles. At 5 volts it spins at 19000 RPM with 0.3 watt draw; at 12 volts it runs at 12000 RPM with 0.48 watt draw. Both settings produce 25 dBA noise. It is not for systems that require a larger mounting footprint or higher static pressure.
Oil Bearing 40000 Hour Rating
The oil bearing is the single specification that decides suitability; it is rated for 40000 hours of expected life and 24 hour continuous duty cycles. If your application demands ball or fluid dynamic bearings with longer MTBF, this unit will not meet that requirement.
Highlights
- Compact 20x20x10 mm size fits tight spaces
- Dual-voltage 5 V and 12 V operation for flexible power
- High-speed 19000 RPM at 5 V moves more air
- Quiet 25 dBA noise level at both voltages
- Long-life oil bearing rated for 40000 hours
Specifications
| Brand | BINYEAE |
|---|
Questions about this item
How loud is 25 dBA in a real build?
At 25 dBA the fan is barely audible in a typical case, roughly the level of a quiet library, so it will not add noticeable noise to a silent or office PC.
What does the 5 V and 12 V rating mean for my motherboard header?
You can run it from a standard 5 V header at 0.06 A and 19 000 RPM, or from a 12 V header at 0.04 A and 12 000 RPM; both voltages are within normal fan-header limits.
Will the 20 x 20 x 10 mm size fit my laptop or small enclosure?
The housing is 20 mm square and 10 mm thick, so it fits any slot or bracket cut for that exact footprint; no larger mounting holes are needed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



