We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black 80 mm case fan 15 mm thick with two-wire lead

SXDOOL

SXDOOL 0815-12 12V 0.2A 80×80×15 mm case fan

SKU CH-4EXT-F8CY1 MPN 0815-12

12 V case fan measuring 80×80×15 mm draws 0.2 A and 2.4 W via a two-wire lead

  • Compact 80 mm frame fits tight chassis spaces
  • 12 V operation matches standard PC power rails
  • Low 0.2 A draw keeps system power budget minimal
  • 4 W rating delivers efficient airflow for size
  • Default 2-wire lead simplifies motherboard connection

80 mm 12 V case fan

The SXDOOL 0815-12 is a compact 80 by 80 by 15 mm case fan designed for standard chassis mounting points. It operates at 12 V and draws 0.2 A for a rated power of 2.4 W. The unit ships with a default two-wire lead for power connection.

Suitable for standard 80 mm mounts

This fan fits builds that use 80 mm mounting holes and a 12 V supply. It is not suited for systems that require a three-wire or four-wire lead for speed reporting or PWM control. Buyers needing higher airflow or larger frame sizes should consider other models.

Two-wire lead interface

The defining specification is the default two-wire lead interface which provides power only without tachometer or PWM signals. Verify that your motherboard or fan controller accepts a two-wire connector before purchasing.

Highlights

  • Compact 80 mm frame fits tight chassis spaces
  • 12 V operation matches standard PC power rails
  • Low 0.2 A draw keeps system power budget minimal
  • 4 W rating delivers efficient airflow for size
  • Default 2-wire lead simplifies motherboard connection

Specifications

No published specifications for this item yet.

Questions about this item

What does the default 2-wire lead mean for speed control?

A 2-wire lead supplies 12 V power only and does not carry a PWM or tachometer signal so the fan runs at full speed whenever powered.

What clearance does the 80×80×15 mm frame need inside the case?

The fan requires an 80 mm square mounting hole pattern and 15 mm depth behind the panel for the frame and blades to clear.

How do I connect the 2-wire lead to a standard motherboard header?

Plug the two pins onto the outer two pins of a 3-pin or 4-pin header matching the key; the centre pin is left unused.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.