SURFACE SHIELDS
SURFACE SHIELDS CS24100 Carpet Protection Film 24 in x 100 ft 2.5 mil Clear
Clear adhesive film shields carpet across 200 sq ft with a 2.5 mil thickness
- MaterialHAWA
- 24 in x 100 ft roll covers 200 sq ft
- 5 mil thickness shields carpet from damage
- Acrylic adhesive backing stays in place during use
- Leak-resistant film stops liquids reaching carpet fibres
- Recyclable plastic material supports responsible disposal
Carpet Protection Film 24 in x 100 ft
This clear film measures 24 inches wide by 100 feet long with a 2.5 mil thickness. It provides 200 square feet of coverage for carpeted surfaces. The acrylic adhesive backing secures the film without damaging fibres. The plastic construction is recyclable after use.
For renovation and moving protection
Builders and homeowners shielding carpet from dirt, paint or heavy foot traffic will find this roll suitable. The leak-resistant barrier stops liquids from soaking through to the floor beneath. Users needing a fire-rated or slip-resistant surface should select a different product. Outdoor or hard-floor applications are not supported by this film.
2.5 mil thickness decides durability
The 2.5 mil gauge determines tear resistance and how long the film withstands loads. Thinner films risk punctures under ladders or equipment wheels. Thicker grades exist for extreme abuse but are not this model. Match the thickness to the expected site conditions before buying.
Highlights
- 24 in x 100 ft roll covers 200 sq ft
- 5 mil thickness shields carpet from damage
- Acrylic adhesive backing stays in place during use
- Leak-resistant film stops liquids reaching carpet fibres
- Recyclable plastic material supports responsible disposal
Specifications
| Brand | SURFACE SHIELDS |
|---|---|
| Material | HAWA |
Questions about this item
Will the 24 in wide roll cover a standard doorway without cutting?
The roll is 24 in wide and 100 ft long, giving 200 sq ft of coverage; measure the doorway and trim the film to fit.
How do I apply the acrylic adhesive backing without trapping bubbles?
Unroll the film slowly, press the adhesive side onto the carpet with a squeegee or broom from the centre outward, and avoid stretching the 2.5 mil material.
When should I replace the film during a long renovation?
Replace the roll once the 200 sq ft coverage is used or if the acrylic adhesive loses tack from dust or heavy traffic.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



