We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small rectangular plastic remotes with 24 coloured buttons each, glossy black finish, CR2032 battery slot visible

SUPERNIGHT 24-Key RGB LED Strip Remote Controller 12V 2-Pack

SKU CH-2X2V-771BJ

Two-pack of 24-key wireless remotes controls 12 V RGB strips with 16 static colours and four dynamic modes

  • FeaturesAdjustable
  • Parts1 Year
  • Labor1 Year
  • Two-pack gives a spare when the original is lost or damaged
  • Works with 5050 2835 3528 4-pin RGB strips
  • 16 static colours plus four dynamic modes
  • CR2032 battery powers the remote instantly
  • DC 12 V supply matches standard LED strip voltage

24-Key RGB LED Remote Controller

The SUPERNIGHT 24-key remote controller operates 12 V DC 4-pin RGB LED strips using SMD 5050, 2835 or 3528 LEDs. It is a direct replacement for a lost or damaged original remote and ships as a two-pack so a spare is always on hand. Each unit is powered by a CR2032 battery and works immediately after the protective plastic tab is removed.

12 V Common-Anode Operation

The controller only supports common-anode strips with a shared positive wire; common-cathode wiring is not compatible. Each colour channel must not exceed 2 A of current draw to avoid damage. The supply voltage is strictly 12 V DC — connection to 24 V DC or 220 V AC will destroy the unit.

Sustained Wireless Control

Sixteen static colours and four dynamic modes — flash, strobe, fade and smooth RGB transition — are selectable wirelessly with brightness adjustment. The infrared link requires direct line of sight to the strip receiver for reliable operation during extended sessions. No mercury, UV or IR radiation is emitted by the remote itself.

Highlights

  • Two-pack gives a spare when the original is lost or damaged
  • Works with 5050 2835 3528 4-pin RGB strips
  • 16 static colours plus four dynamic modes
  • CR2032 battery powers the remote instantly
  • DC 12 V supply matches standard LED strip voltage

Specifications

BrandSUPERNIGHT
FeaturesAdjustable
Parts1 Year
Labor1 Year

Questions about this item

How do I install the remote and what step do people often miss?

Pull out the plastic battery tab from each remote, point the remote directly at the controller, and ensure your LED strip is a 4-pin common anode type running on DC12V.

What maintenance or replacement will the remote need later?

Each remote uses a CR2032 coin cell; replace it when the range drops or buttons stop responding.

What limit appears first under sustained use?

Each colour channel must not exceed 2A, so long runs at full brightness will hit that current limit before anything else.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.