We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Supermicro

Supermicro X13SEM-TF motherboard accessory

SKU CH-MRJP-N2026

Micro-ATX board with LGA4677 socket, Intel C741 chipset, dual 10 GbE LAN and eight DDR5 DIMM slots

  • micro ATX form factor fits compact server chassis
  • LGA4677 Socket-E supports 4th Gen Xeon up to 60 cores
  • Dual 10 Gigabit LAN ports for high-speed networking
  • DDR5 memory at 4800 MHz with ECC for data integrity
  • PCIe 5.0 x16 slots enable latest GPU and accelerator cards

Supermicro micro ATX LGA4677 server board

This motherboard accessory uses the Intel C741 chipset and fits a single LGA4677 Socket-E processor. It supports 4th Generation Intel Xeon Scalable CPUs with up to 60 cores and a 350 Watt TDP. The micro ATX form factor suits compact server or workstation builds needing dual 10 Gigabit LAN and onboard ASPEED AST2600 graphics.

Check CPU cooler clearance and power headers

Verify your chassis accepts a micro ATX board and provides room for a cooler rated to 350 Watt TDP. The board requires a 24-pin main connector plus two 8-pin ATX12V connectors. Ensure your power supply delivers those cables. Memory must be DDR5 Registered or 3DS Registered ECC DIMMs running at 4000, 4400 or 4800 MHz.

Suits single-socket Xeon servers

This board suits builders deploying a single 4th Generation Xeon Scalable processor with up to 2 TB of DDR5 ECC memory. It offers two PCIe 5.0 x16 slots, one PCIe 5.0 x8 slot, two M.2 Key M slots and eight NVMe connectors via SlimSAS. Buyers needing multiple processor sockets, consumer CPUs, non-ECC memory or more than eight NVMe devices should look elsewhere.

Highlights

  • micro ATX form factor fits compact server chassis
  • LGA4677 Socket-E supports 4th Gen Xeon up to 60 cores
  • Dual 10 Gigabit LAN ports for high-speed networking
  • DDR5 memory at 4800 MHz with ECC for data integrity
  • PCIe 5.0 x16 slots enable latest GPU and accelerator cards

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and what must I buy separately?

The board is sold new and includes the motherboard itself. You will need to supply a compatible Xeon Scalable processor, DDR5 registered or 3DS registered DIMMs, storage drives, a chassis with a 24-pin and two 8-pin ATX12V connectors, and an operating system.

Which memory speed should I choose for this board?

The board supports DDR5 at 4000 MHz, 4400 MHz and 4800 MHz bus clocks. Select modules rated for the highest speed your budget allows; the system will run them at the highest common frequency supported by the installed CPU.

What does the 10 Gigabit LAN figure mean for real-world throughput?

Each of the two 10 Gigabit Ethernet ports can move up to 10 Gb/s of raw bandwidth. Actual throughput depends on the switch, cabling, CPU load and protocol overhead, but typical sustained transfers reach several gigabytes per second with large frames.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.