We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rackmount server chassis with eight front drive bays

Supermicro

Supermicro SYS-1029P-MT 1U barebone server

SKU CH-0ZCR-JDC08 MPN SYS-1029P-MT

1U rackmount barebone with dual LGA 3647 sockets, eight 2.5-inch hot-swap bays and IPMI 2.0 remote management

  • WorkloadGeneral Purpose Server
  • Dual Xeon Scalable processors supported via LGA 3647 sockets
  • 8 DIMM slots accept up to 2 TB DDR4 ECC memory
  • Eight hot-swap 2.5" SATA drive bays for dense storage
  • PCIe 3.0 x8 slot adds specialised acceleration or networking
  • IPMI 2.0 with KVM and dedicated LAN enables remote management

Dual-socket 1U server for dense compute

The Supermicro SYS-1029P-MT is a 1U rackmount barebone that accepts two 2nd Gen Intel Xeon Scalable processors in LGA 3647 sockets. Eight DIMM slots support up to 2 TB of DDR4 ECC memory at 2933 MHz. Eight hot-swap 2.5" SATA bays and an optional slim DVD-ROM provide local storage, while a single PCI-E 3.0 x8 full-height half-length slot adds targeted expansion. The Intel C621 chipset underpins the platform for general-purpose workloads.

Thermals noise and power in a 1U chassis

A 450 W redundant power supply feeds both CPUs, memory, drives and the single add-in card within the 1U height. Dual 1 GbE ports via Marvell 88E1512 and a dedicated IPMI 2.0 LAN keep management traffic separate from production traffic. IPMI 2.0 with KVM-over-LAN allows remote power control and console access without a local monitor or keyboard. Front-to-rear airflow is handled by the chassis fans, which spin faster under heavy dual-socket load.

Build quality and daily connectivity

The unit weighs 40 lbs and uses a steel chassis with tool-less drive carriers for quick bay access. Rear I/O includes two USB 2.0 ports and one VGA connector for local install or troubleshooting. Two SuperDOM ports and one M.2 connector that accepts PCIe or SATA modules sit on the motherboard for boot-device flexibility. The single PCI-E 3.0 x8 slot is full-height half-length, so only low-profile or half-length cards fit; builders needing multiple GPUs or additional NICs should choose a wider platform.

Highlights

  • Dual Xeon Scalable processors supported via LGA 3647 sockets
  • 8 DIMM slots accept up to 2 TB DDR4 ECC memory
  • Eight hot-swap 2.5" SATA drive bays for dense storage
  • PCIe 3.0 x8 slot adds specialised acceleration or networking
  • IPMI 2.0 with KVM and dedicated LAN enables remote management

Specifications

BrandSUPERMICRO
ModelSYS-1029P-MT
WorkloadGeneral Purpose Server
Shipping weight15.58 kg
Package size762 × 603 × 203 mm

Questions about this item

How do I install the processors into the dual Socket P (LGA 3647) slots?

Align each Xeon processor with the socket keying, lower it straight down without pressure, then close the load plate and torque the retention screws in the labelled sequence to avoid uneven seating.

Which components will need replacement after extended operation?

The eight hot-swap 2.5 SATA3 drive bays and cooling fans are the primary field-replaceable units; SuperDOM modules and the optional M.2 drive can also be swapped without removing the chassis cover.

What thermal limit appears first when both CPUs run sustained workloads?

The 1U height restricts airflow, so CPU package temperatures hit their throttle point before the 88 E1512 LAN ports or DDR4-2933 memory reach any electrical limit.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.