We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
60 cm Mini-SAS HD cable with two SFF-8643 connectors, 30 AWG

Supermicro

Supermicro CBLSAST0593/SUP 60cm Mini-SAS HD to Mini-SAS HD Internal 30AWG sas cable

SKU CH-AK0B-43ZWH MPN CBLSAST0593/SUP

Connects storage devices, servers or add-on cards with 60 cm Mini-SAS HD SFF-8643 links at 30 AWG

  • TypeMini-SAS Cable
  • Length60cm
  • Cable Length1.96 ft. (0.60m)
  • Connector A1x Mini-SAS
  • Connector B1x Mini-SAS
  • Connector Number2
  • 60 cm length fits tight server chassis
  • SFF-8643 connectors link storage devices and add-on cards
  • 30 AWG wire keeps signal integrity over the run
  • T10 and SFF compliant for broad system compatibility
  • Validated on Supermicro 2028, 2029, 6028 and 6029 platforms

Internal storage link

This 60cm Mini-SAS HD cable connects storage devices, servers and add-on cards using SFF-8643 connectors on both ends. It is built to T10 and SFF standards and validated for specific Supermicro systems including the SYS-2028, SYS-2029, SYS-6028 and SYS-6029 families. The 30 AWG conductors keep the assembly thin for tight chassis routing.

Direct replacement part

The bundle contains only the cable itself with no brackets, screws or software. Its value is the factory validation that guarantees pin-out and signal integrity on the listed platforms. Installers do not need to source separate adapters or verify compatibility matrices for the supported models.

60cm reach constraint

The fixed 60cm length decides whether the cable spans the distance between your controller and backplane. Builds that need longer runs or external bulkhead connections cannot use this part.

Highlights

  • 60 cm length fits tight server chassis
  • SFF-8643 connectors link storage devices and add-on cards
  • 30 AWG wire keeps signal integrity over the run
  • T10 and SFF compliant for broad system compatibility
  • Validated on Supermicro 2028, 2029, 6028 and 6029 platforms

Specifications

BrandSupermicro
ModelCBLSAST0593
TypeMini-SAS Cable
Length60cm
Cable Length1.96 ft. (0.60m)
Connector A1x Mini-SAS
Connector B1x Mini-SAS
Connector Number2
Connector DetailMini-SAS HD to Mini-SAS HD Internal 30AWG Cable
Shipping weight0.45 kg
Package size381 × 381 × 254 mm

Questions about this item

Does the 30 AWG wire gauge on the CBL-SAST-0593 require periodic replacement?

The cable is a passive assembly with no moving parts or consumable elements; it does not require scheduled replacement under normal use.

What limits the sustained throughput of this 60 cm Mini-SAS HD link?

Throughput is determined by the host controller and drive capabilities; the cable itself is validated for standard SAS signalling without an imposed bandwidth ceiling.

Does the 1.97 ft length add measurable heat or power draw during all-day operation?

As a passive copper cable it draws no power and generates no heat of its own; any thermal load comes from the connected devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.