SUNLU PLA Filament Wood Color 1.75mm 1KG
Wood-colour PLA filament on a 1 kg spool, 1.75 mm diameter with ±0.02 mm tolerance for reliable FDM printing
- Color1000g-pla Wood Color
- Diameter1.75
- Weight1 kilograms
- Wood-like finish for creative prints
- ±0.02 mm diameter accuracy prevents clogs
- 75 mm size fits almost all FDM printers
- Neat 100 % winding avoids tangles and jams
- 1 kg spool on 8.00" reel suits many printers
Wood PLA Filament 1KG
SUNLU wood-colour PLA filament comes on a 1 kg spool of 1.75 mm diameter material. It is aimed at hobbyists and makers who want a wood-like finish without the abrasion of composite filaments. The PLA base keeps printing straightforward for beginners while still satisfying experienced users. No special hardware is required beyond a standard FDM printer.
Neat-wound spool and standard dimensions
The spool measures 8.00 inches in diameter, 2.50 inches wide and has a 2.20 inch hub hole, so it fits most printer spool holders. A self-developed winding process claims a 100 percent neat rate, reducing tangles and jams during long prints. Consistent dimensional accuracy of ±0.02 mm helps maintain steady extrusion. The wood colour is achieved through pigment rather than filler, avoiding nozzle wear.
Practical limits of standard PLA
Recommended nozzle temperature is 200 to 230 °C and bed temperature 50 to 65 °C, with print speeds of 50 to 100 mm/s. Like all unmodified PLA, the material softens well below 100 °C, so printed parts are unsuitable for high-heat environments. Layer adhesion is strong but the filament remains brittle compared to PETG or ABS. Users needing functional heat resistance or impact strength should consider other polymers.
Highlights
- Wood-like finish for creative prints
- ±0.02 mm diameter accuracy prevents clogs
- 75 mm size fits almost all FDM printers
- Neat 100 % winding avoids tangles and jams
- 1 kg spool on 8.00" reel suits many printers
Specifications
| Brand | SUNLU |
|---|---|
| Model | 3D Printer Filament PLA Filament 1.75mm |
| Color | 1000g-pla Wood Color |
| Diameter | 1.75 |
| Weight | 1 kilograms |
Questions about this item
What nozzle diameter does the 1.75 mm filament work with?
The 1.75 mm diameter with ±0.02 mm accuracy fits almost all 1.75 mm FDM printers.
Will the 8.00" spool with 2.20" hub hole fit my printer's holder?
Spool diameter is 8.00", width 2.50", hub hole 2.20"; suits many FDM printers.
What nozzle and bed temperatures should I set for the first print?
Start at 200–230 °C nozzle, 50–65 °C bed, and 50–100 mm/s speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
