We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three white 120mm ARGB PWM case fans with anti-vibration pads

SUIUBUY

SUIUBUY 3-Pack 120mm ARGB PWM Case Fan White

SKU CH-46GT-HQRGE

Three white 120 mm ARGB PWM fans deliver 55-60 CFM airflow at 25-30 dBA with 5 V addressable RGB sync and 800-1300 RPM hydraulic bearings rated for 40,000 hours

  • Fan ControllerController
  • TypeCase Fan
  • Air Flow55-60 CFM
  • Noise Level25 - 30 dBA
  • Power Connector3 / 4 Pin
  • ColorWhite
  • ARGB lighting syncs via 5V 3-pin motherboard header
  • PWM auto-adjusts 800-1300 RPM speed to chassis temperature
  • 55-60 CFM airflow cools cases and radiators effectively
  • 25-30 dBA quiet operation with vibration-damping rubber pads
  • Hydraulic bearing rated for 40000 hours lifespan

Three-pack white ARGB fans

This three-pack supplies matching 120 mm fans finished in white with addressable RGB lighting. They suit builders who want coordinated illumination and airflow across intake, exhaust or radiator positions. The bundled controller handles lighting without relying on motherboard software. Buyers needing only a single fan or a different colour should look elsewhere.

Hydraulic bearing with anti-vibration pads

Each fan uses a hydraulic bearing rated for 40000 hours and ships with eight rubber pads to decouple vibration from the chassis. The 3-pin and 4-pin power connectors fit standard headers, while a 5 V 3-pin ARGB link syncs lighting to compatible boards. PWM control lets the fans run between 800 and 1300 RPM, delivering 55 to 60 CFM at 25 to 30 dBA.

Check headers and clearance before ordering

Verify that your motherboard offers a 5 V 3-pin ARGB header if you want synchronised lighting effects. Confirm the case or radiator accepts 120 mm mounting points and that enough fan headers or a splitter are available for three units. The fans operate from 5 V to 12 V, so ensure your header or controller can supply the required voltage range.

Highlights

  • ARGB lighting syncs via 5V 3-pin motherboard header
  • PWM auto-adjusts 800-1300 RPM speed to chassis temperature
  • 55-60 CFM airflow cools cases and radiators effectively
  • 25-30 dBA quiet operation with vibration-damping rubber pads
  • Hydraulic bearing rated for 40000 hours lifespan

Specifications

Fan ControllerController
TypeCase Fan
Air Flow55-60 CFM
Noise Level25 - 30 dBA
Power Connector3 / 4 Pin
ColorWhite
LEDARGB

Questions about this item

What does the 4-pin PWM connector control on these 120 mm fans?

The 4-pin PWM connector lets the motherboard vary speed between 800 and 1300 RPM based on temperature, while the separate 5 V 3-pin ARGB header syncs lighting effects.

How much clearance do the included anti-vibration pads add when mounting the 120 mm fans?

Each fan ships with eight rubber pads that add a few millimetres at the screw holes, so allow slightly extra depth in tight chassis or radiator stacks.

Which cable goes where when installing the 3-pack for both speed control and ARGB sync?

Plug the 4-pin PWM lead into a CPU_FAN or SYS_FAN header for speed control, and the 5 V 3-pin ARGB lead into a matching motherboard ARGB header for lighting.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.