Stud Finder Wall Scanner
A 5-in-1 wall scanner locates wood, metal and live AC wires with an LCD display and audio alerts
- Intelligent micro-sensor chip delivers above 97% detection accuracy
- Five scan modes cover wood, metal and live AC wires
- HD LCD display and audio alarm show and sound target location
- Ergonomic anti-slip handle and side calibration button simplify operation
- Detects studs up to 38 mm deep and metal up to 60 mm deep
MOCITA SH402 Stud Finder
The MOCITA SH402 wall scanner locates wood, metal and live AC wires behind walls, floors and ceilings. Its intelligent micro-sensor chip delivers an accuracy rate above 97 per cent. The tool is designed for professionals, homeowners and DIY enthusiasts who need reliable detection before drilling or cutting.
Five Detection Modes for Sustained Use
The scanner offers five modes: 1/2 stud mode finds wood and metal up to 13mm deep, mode 1 reaches 25mm and mode 1.5 reaches 38mm. Metal scan detects metal up to 60mm deep while AC scan finds live unshielded wires up to 51mm deep. Pressing the mode button switches between functions and the side scan button recalibrates to reduce errors during extended scanning sessions.
HD LCD Display with Audio Alarm
A high-definition LCD screen shows the target position visually while a sound alarm beeps when the detector approaches an object. The ergonomic anti-slip handle provides comfort during prolonged operation. This combination of visual and audible feedback lets the user confirm findings quickly without guesswork.
Highlights
- Intelligent micro-sensor chip delivers above 97% detection accuracy
- Five scan modes cover wood, metal and live AC wires
- HD LCD display and audio alarm show and sound target location
- Ergonomic anti-slip handle and side calibration button simplify operation
- Detects studs up to 38 mm deep and metal up to 60 mm deep
Specifications
No published specifications for this item yet.
Questions about this item
Does the SH402 stud finder make any sound or get warm during extended scanning sessions?
The device emits a beep through its audio alarm when it detects a stud, metal, or live AC wire; no heat or fan noise is mentioned in the specifications.
What must I have on hand before the MOCITA SH402 will operate?
The scanner requires a standard 9 V battery, which is not included, and a flat wall or ceiling surface to calibrate against before each mode change.
Will the SH402 work reliably on older lath-and-plaster walls with deep studs?
In 1.5 mode it detects wood or metal studs up to 38 mm deep and metal up to 60 mm, so it can reach studs behind thick plaster if the total depth stays within those limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
