Innovation First, Inc.
Innovation First, Inc. 1UCMA-137 1U Cable Management Arm 19" 28.5"-33" computer accessory
- Product Type:Cable…
- Panel Width:19" Rac…
$72.99
0.00086578BTC
In stock
STARTECH
STARTECH USBINT5PIN 1.5 ft Internal 5 pin USB IDC Motherboard Header Cable F/F
Connects front-panel or rear USB ports to a motherboard header using a 1.5 ft female-to-female IDC cable with standard USB 2.0 pinout
- TypeCable Connectors
- ColorBlack
- Length18"
- Cable Length0.5 ft.
- SpecificationsWire Gauge: 24 AWG
- Connector A1x IDC 5pin female
- 18 in cable links front-panel USB ports to motherboard header
- Female-to-female IDC connectors fit standard 5-pin USB 2.0 pin-out
- 24 AWG wire gauge supports reliable internal signal routing
- 5 ft length keeps chassis cabling tidy and organised
- Black jacket simplifies cable identification during builds
Internal 5-pin USB IDC Header Cable
This 1.5 ft internal cable connects front-panel USB ports or rear expansion boards directly to a motherboard header. Both ends use a female IDC 5-pin connector wired to the standard USB 2.0 pin-out and colour assignments. It is suited for builders routing internal USB links inside a chassis.
Thermals noise and power draw
As a passive 24 AWG wire assembly the cable generates no heat and produces no audible noise. It draws no power of its own and simply carries the signals and current supplied by the motherboard header. Normal use adds no thermal load to the system.
Build quality and daily implications
The black 18 in ribbon uses 24 AWG conductors terminated in two keyed female IDC sockets for a secure press-fit on standard headers. Female-to-female gender means both devices being joined must present male header pins. The fixed 0.5 ft length suits short internal runs but cannot span wide chassis distances.
Highlights
- 18 in cable links front-panel USB ports to motherboard header
- Female-to-female IDC connectors fit standard 5-pin USB 2.0 pin-out
- 24 AWG wire gauge supports reliable internal signal routing
- 5 ft length keeps chassis cabling tidy and organised
- Black jacket simplifies cable identification during builds
Specifications
| Brand | StarTech.com |
|---|---|
| Model | USBINT5PIN |
| Type | Cable Connectors |
| Color | Black |
| Length | 18" |
| Cable Length | 0.5 ft. |
| Specifications | Wire Gauge: 24 AWG |
| Connector A | 1x IDC 5pin female |
| Connector B | 1x IDC 5pin female |
| Connector Number | 2 |
| Terminal Gender | Female to Female |
| Features | Uses standard USB 2.0 pin out and colors assignments Connect front panel USB ports to the motherboard or expansion card Connect Rear USB Expansion boards to the motherboard |
| Shipping weight | 0.02 kg |
| Package size | 202 × 119 × 23 mm |
Questions about this item
How do I connect the 18 in IDC 5-pin female ends to my motherboard header without reversing the pin-out?
Align the keyed notch on each IDC 5-pin female connector with the missing pin on the motherboard or expansion-card header, press straight down until the latch clicks, and verify the standard USB 2.0 colour order matches the board silkscreen before powering on.
What upkeep will the 24 AWG ribbon require over time?
Inspect the black 24 AWG ribbon periodically for kinks or cracked insulation, reseat both IDC 5-pin female connectors if front-panel ports become intermittent, and replace the cable if any conductor shows bare copper.
Which constraint appears first when the 0.5 ft link runs at full USB 2.0 speed for long periods?
The USB 2.0 signalling rate limits sustained throughput before the 24 AWG conductors reach any thermal or voltage-drop threshold.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Vertiv
Vertiv 4UTELECOMRKIT 19 in rack mount bracket accessory
- GXT4U Wall Mount Br…
- Mounting Bracket
$70.99
0.00084206BTC
In stock
