NVIDIA H200 NVL AI Accelerator Card 141GB HBM3e PCIe 5.0 x16 900-21010-0040-000
- PCI Express 5.0 x16
- NVIDIA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
STARTECH
Adjustable-depth steel rails mount 19-inch servers in 3U racks, supporting 215 lbs from 16.5 to 41.5 inches deep
These universal rack rails mount 19-inch servers or networking hardware in any standard rack. The 3U steel construction supports up to 215 lbs (97.3 kg) and fits mounting depths from 420 mm to 1054 mm. A removable rear cable management panel helps organise cables. The set includes rails, cage nuts, screws and a wrench for quick installation.
Installers fitting equipment between 16.5 in and 41.5 in deep will find the adjustable range covers most common chassis. Builders needing to secure gear outside that depth range or requiring tool-less sliding rails should consider other options. The fixed design does not extend for service access once mounted.
The 97.3 kg load rating is the key figure that decides if these rails match your hardware. Verify the server or appliance weight before ordering; heavier units need rails rated above this limit.
| Brand | StarTech.com |
|---|---|
| Model | UNIRAILS3U |
| Type | Rack Rails |
| Rack Units | 3U |
| Color | Black |
| Material | Steel |
| Weight Capacity | 215 lbs. [97.3 kg] |
| Features | Sturdy steel construction Weight capacity up to 97kg (215lbs.) Adjustable depth from 420mm (16.5 in) - 1054mm(41.5 in) Multiple mounting hole patterns for securing your equipment Removable rear cable management panel Includes assembly hardware, mounting hardware, and assembly tool 2 sturdy cross-bars spanning center of rails for equipment that doesn't quite reach the opposing rail lip. |
| Included Accessory | 1 - Set Universal Rack Rails 16 - Assembling Nuts (16 pre-installed) 22 - Assembling Screws (16 pre-installed) 14 - M5 Panel Screws 14 - M5 Cage Nuts 1 - M5 Wrench |
| Unit Dimension | External Width: 18.3 in [465 mm] External Height: 5.1 in [130 mm] External Depth: 18.9 in [481 mm] Maximum Mounting Depth: 41.5 in [1054 mm] Minimum Mounting Depth: 16.5 in [420 mm] |
| Unit Weight | 8.5 lb [3.9 kg] |
| Shipping weight | 4.54 kg |
| Package size | 495 × 163 × 107 mm |
The rails adjust from 420 mm to 1054 mm, so they will fit any cabinet whose front-to-rear rail spacing falls inside that range.
Yes, the 14 M5 cage nuts supplied are designed for standard square-hole posts, and the 14 M5 panel screws work with threaded round-hole posts.
Confirm the equipment weight does not exceed 215 lbs, ensure all 16 pre-installed nuts and 22 screws are tight, and check that the rear cable management panel sits flush.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?