We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
10 metre yellow duplex fibre cable with LC and SC connectors

STARTECH

STARTECH SMLCSCOS210M 10m LC to SC OS2 Single Mode Duplex Fibre Optic Cable

SKU CH-8C40-D9BTR

A 10 metre OS2 single-mode duplex cable with LC to SC UPC connectors for 100G links

  • 10 m reach links distant single-mode equipment
  • 100 G capacity supports high-bandwidth backbone runs
  • Bend-insensitive fibre tolerates tight routing without signal loss
  • Low insertion loss preserves link budget over full length
  • LSZH jacket limits smoke and toxic fumes in fire

STARTECH 10m LC to SC OS2 Fibre Cable

This 10 metre duplex fibre optic cable connects LC and SC UPC polished connectors. It is built to OS2 single mode specification with a 9/125 micron core. The LSZH jacket reduces smoke emission in fire conditions. It suits installers and network engineers deploying long distance links.

Bend Insensitive 100G Ready Duplex Link

The bend insensitive design maintains signal integrity around tight routing paths. Low insertion loss preserves budget for 100G transmission speeds. Duplex construction provides separate transmit and receive fibres in one assembly. No additional polishing or termination is required on site.

For Single Mode Infrastructure Upgrades

This cable fits environments standardised on LC and SC interfaces with OS2 cabling. It does not support multimode OM3 or OM4 systems. Installers needing MPO or MTP connectors should select a different assembly. Buyers requiring armoured or outdoor rated jackets must source an alternative product.

Highlights

  • 10 m reach links distant single-mode equipment
  • 100 G capacity supports high-bandwidth backbone runs
  • Bend-insensitive fibre tolerates tight routing without signal loss
  • Low insertion loss preserves link budget over full length
  • LSZH jacket limits smoke and toxic fumes in fire

Specifications

BrandStarTech

Questions about this item

How far can the 9/125 µm single-mode fibre carry a 100G signal without regeneration?

The OS2 single-mode duplex cable supports 100G transmission over its full 10 m length with low insertion loss.

Does the LSZH jacket or bend-insensitive fibre limit heat build-up during continuous 100G operation?

LSZH jacket and bend-insensitive fibre are passive; they add no heat and require no active cooling during all-day use.

Which transceivers must I already have for the LC and SC UPC connectors to work?

You need LC UPC and SC UPC single-mode transceivers or patch-panel ports that match the 9/125 µm OS2 fibre.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.