We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFP+ direct attach cable with latching plugs on both ends, 1.5 m long

STARTECH

STARTECH SFPH10GBCU15 network ethernet cable SFP+ 1.5 m 10 GbE

SKU CH-XZ5K-YT74A MPN SFPH10GBCU15

A 1.5 m SFP+ direct-attach copper cable connects two SFP+ ports at 10 GbE with under 0.5 W power draw

  • TypeSFP+ Direct Attach Cable
  • CatSFP+
  • Connector A1 x SFP+ Latching Plug
  • Connector B1 x SFP+ Latching Plug
  • Length4.9 ft
  • ColorBlack
  • Guaranteed Cisco compatibility matches SFP-H10GB-CU1-5M exactly
  • Copper twinax design costs less than fiber-optic modules
  • Passive cable draws under .5 W for efficient operation
  • Hot-swappable SFP+ connectors allow changes without downtime
  • MSA-compliant build meets SFF-8431 and SFF-8432 standards

Cisco-Compatible SFP+ Direct Attach Cable

This 1.5 m SFP+ direct-attach copper cable provides a cost-effective 10 GbE link between two SFP+ ports. It matches the Cisco SFP-H10GB-CU1-5M specification and complies with MSA industry standards. The passive twinax design consumes less than 0.5 W and supports hot-swappable installation alongside fiber modules.

Suitable For Short-Rack 10 GbE Links

Network engineers connecting top-of-rack switches or servers within a single rack will find the 4.9 ft length convenient. Builders who need longer runs between racks or across data-centre aisles should look at alternative cable lengths or fiber-optic modules.

MSA-Compliant 30 AWG 100-Ohm Twinax Construction

The cable uses 30 AWG conductors with 100-ohm impedance and meets SFF-8431 and SFF-8432 connector standards. This construction guarantees signal integrity for 10 GbE while keeping power draw below 0.5 W.

Highlights

  • Guaranteed Cisco compatibility matches SFP-H10GB-CU1-5M exactly
  • Copper twinax design costs less than fiber-optic modules
  • Passive cable draws under .5 W for efficient operation
  • Hot-swappable SFP+ connectors allow changes without downtime
  • MSA-compliant build meets SFF-8431 and SFF-8432 standards

Specifications

BrandStarTech.com
ModelSFPH10GBCU15
TypeSFP+ Direct Attach Cable
CatSFP+
Connector A1 x SFP+ Latching Plug
Connector B1 x SFP+ Latching Plug
Length4.9 ft
ColorBlack
Features100% Cisco compatible, equivalent to the Cisco SFP-H10GB-CU1-5M cable
Cost-effective alternative to fiber-optic modules
Meets or exceeds OEM specifications and MSA (Multi-Source Agreement) industry standards
30 AWG, 100-ohm impedance
Hot-swappable with fiber-optic modules
Compliant with SFF-8431 and SFF-8432 connector standards
Low power consumption: < 0.5 W
Shipping weight0.08 kg
Package size203 × 102 × 51 mm

Questions about this item

How do I install the SFPH10GBCU15 cable and what step is often missed?

Insert each SFP+ latching plug into a compatible port until the latch clicks. The step often missed is confirming the latch is fully engaged so the cable cannot pull free.

What maintenance or replacement will the SFPH10GBCU15 need later?

The passive copper twinax has no moving parts or firmware. Inspect the latches and connector ends for dust or bent pins during rack changes; replace only if a link fails or physical damage appears.

What limit appears first on the SFPH10GBCU15 under sustained 10 GbE load?

The 1.5 metre passive design reaches its maximum specified reach first. Signal integrity is guaranteed to 10 GbE at this length; longer runs would require active or optical cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.