We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SFP+ direct-attach Twinax cable with latching plugs on both ends, 3 m long

STARTECH

STARTECH SFP10GPC3M network ethernet cable 3 m 10 GbE

SKU CH-CG0R-6X9AS MPN SFP10GPC3M

A passive SFP+ direct-attach Twinax cable delivers 10 GbE over copper for 3 m rack-to-rack links

  • TypeSFP+ Direct Attach Cable
  • CatSFP+
  • Connector A1 x SFP+ Latching Plug
  • Connector B1 x SFP+ Latching Plug
  • Length9.84 ft.
  • ColorBlack
  • Delivers dependable 10 GbE connectivity over copper cabling
  • Passive Twinax cable consumes less than 0.1 W power
  • Hot-swappable design minimises network disruption during upgrades
  • MSA compliant and meets SFF-8431 and SFF-8432 standards
  • 3 metre length suits medium-distance rack connections

Direct-Attach 10 GbE Copper Link

The SFP10GPC3M is a passive SFP+ Twinax cable built for 10 Gigabit Ethernet connections between switches, servers or storage appliances. It replaces fiber modules with a lower-cost copper run while keeping full 10 GbE throughput. Network engineers and data-centre technicians use it for short-haul links where fiber would be over-specified.

Latching SFP+ Ends Enable Hot-Swap Rack Work

Both ends carry a latching SFP+ plug that seats directly into standard SFP+ ports without transceivers. The 30 AWG, 100-ohm twinax construction meets SFF-8431 and SFF-8432 mechanical and electrical specs, so the cable is interchangeable with compliant fiber or copper modules. Hot-swappable insertion lets technicians add or replace links without powering down the rack.

Passive Design Draws Under 0.1 W and Runs Silent

With no active electronics the cable consumes less than 0.1 W, adding negligible heat to the cabinet and requiring no external power. The absence of active components also means zero fan noise, making it suitable for quiet lab or office-adjacent racks. The 9.8 ft length covers typical intra-rack or adjacent-rack runs while staying within passive copper reach limits.

Highlights

  • Delivers dependable 10 GbE connectivity over copper cabling
  • Passive Twinax cable consumes less than 0.1 W power
  • Hot-swappable design minimises network disruption during upgrades
  • MSA compliant and meets SFF-8431 and SFF-8432 standards
  • 3 metre length suits medium-distance rack connections

Specifications

BrandStarTech.com
ModelSFP10GPC3M
TypeSFP+ Direct Attach Cable
CatSFP+
Connector A1 x SFP+ Latching Plug
Connector B1 x SFP+ Latching Plug
Length9.84 ft.
ColorBlack
FeaturesCost-effective alternative to fiber-optic modules
Meets or exceeds MSA (Multi-Source Agreement) industry standards
30 AWG, 100-ohm impedance
Hot-swappable with fiber-optic modules
Compliant with SFF-8431 and SFF-8432 connector standards
Low power consumption: < 0.5 W
Shipping weight0.14 kg
Package size203 × 102 × 51 mm

Questions about this item

What SFP+ standard does this direct-attach cable meet, and what speed does it cap at?

It complies with SFF-8431 and SFF-8432 MSA standards and delivers 10 GbE performance over copper.

What connectors and length does the cable use to fit across a rack?

Each end has an SFP+ latching plug and the passive Twinax assembly measures 3 m (9.84 ft).

How is the SFP10GPC3M installed, and what mistake should I avoid?

Insert the latching plugs into SFP+ ports until they click; the cable is hot-swappable, so do not power down the switch or server.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.